NEC MultiSync E658 Setup Manual page 5

Prevent tipping and falling for earthquakes or other shocks.
To prevent personal injury or damage to the product caused by tipping
over due to earthquakes or other shocks, make sure to install the
product in a stable location and take measures to prevent falling.
The measures to prevent falling and tipping are intended for reducing
the risk of injury, but may not guarantee the effectiveness against all
earthquakes.
The product may tip causing personal injury.
• Use commercially-available clamps and screws (M6) to secure it to
the product.
9 • Be sure to remove the cord or chain from the wall before moving the
product to prevent personal injury or damage to the product.
The product may fall causing personal injury.
• Do not attempt to hang the product using an installation safety wire.
• Please install the product in an area on the wall or ceiling strong
enough to support the weight of the product.
• Prepare the product using mounting accessories, such as hook,
eyebolt, or mounting parts, and then secure the product with a
safety wire. The safety wire must not be tight.
• Please make sure the mounting accessories are strong enough to
support the product weight and size before installing it.
WARNING
English-5
EN