Table of Contents
Advertisement
Caution Drain the water tank before you take it down.
Assembling
After cleaning, please assemble the parts including the head,
water tank and lids as follows:
1. Put the seal ring in order first (the seal ring cannot turn up),
then insert the head into the hole.
2. Hold the two sides of the water tank tightly, fit the water tank
along the guides on the door.
3. Push the two sides of the water tank downwards as the picture
shows.
4. When you hear clicks on both sides and at the same time, then
both sides of the water tank is closed to the door liner, It means
the installation is complete.
Filling water
Before you fill the drinking water into the water tank, ensure
that the water tank is steady and in the correct position
Caution!
Fill with water up to 3.5L (which is suggested) and not above
that level. Otherwise, it may overflow when the lids is closed.
Advertisement
Table of Contents
