Requirements for the set-up location
NOTE
►
Do not place the device directly onto varnished furniture . The rubber feet of
the device contain chemical softeners that may attack varnished surfaces .
Use a mat if you want to place the device on a varnished piece of furniture .
For safe and trouble-free operation of the device, the set-up location must fulfil
the following requirements:
■
Place the device on a firm, flat and level surface .
■
Position the device so that the speaker
are not covered .
■
Do not operate the device in a hot or very wet environment or in the vicinity
of combustible materials .
■
The power socket must be easily accessible so that the plug of the mains
adapter can be easily disconnected in an emergency .
Connecting the power supply
ATTENTION
►
Before connecting the device, compare the connection data on the name-
plate of the power supply unit (voltage and frequency) with those of your
mains supply . These data must match to prevent damage to the device .
♦
Connect the supplied mains adapter to the mains adapter connection
and to a mains socket . The device is now in standby mode .
Aerial
♦
Pull out the telescopic aerial
■
12
GB │ IE │ NI
│
and the bass reflex opening
9
completely for DAB+ and FM reception .
0
q
r
SRH 5 C3