Requirements For The Set-Up Location; Connecting The Power Supply; Aerial - Silvercrest 353496 2007 Operating Instructions And Safety Instructions

Requirements for the set-up location

NOTE
► Do not place the device directly onto varnished furniture. The rubber feet of
the device contain chemical softeners that may attack varnished surfaces.
Use a mat if you want to place the device on a varnished piece of furniture.
For safe and trouble-free operation of the device, the set-up location must fulfil
the following requirements:
■ Place the device on a firm, flat and level surface.
■ Position the device so that the speaker
are not covered.
■ Do not operate the device in a hot or very wet environment or in the vicinity
of combustible materials.
■ The power socket must be easily accessible so that the plug of the mains
adapter can be easily disconnected in an emergency.

Connecting the power supply

ATTENTION
► Before connecting the device, compare the connection data on the name-
plate of the power supply unit (voltage and frequency) with those of your
mains supply. These data must match to prevent damage to the device.
♦ Connect the supplied mains adapter to the mains adapter connection
and to a mains socket. The device is now in standby mode.

Aerial

♦ Pull out the telescopic aerial
■ 12 GB │ IE
│
9
and the bass reflex opening
0
completely for DAB+ and FM reception.
q
r
SRH 5 C3