Page 1
PUB. DIE-0504-000F Digital Cinema Camera Firmware ver. 1.0.5.1.00 Instruction Manual...
Page 2
Trademark Acknowledgements • SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC. • Canon is an authorized licensee of the CFast 2.0™ trademark, which may be registered in various jurisdictions. • Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Page 3
Highlights of the Camera The Canon EOS C200 / EOS C200B Digital Cinema Camera is the latest camera in the highly-respected Cinema EOS line. Cinema EOS cameras are increasingly relied upon by industry professionals due to their state-of-the-art technology and the cameras’ high quality. The C200 / C200B continues that tradition by offering many features that will help you articulate your creative vision.
Page 4
Custom picture settings or replicate them perfectly on another C200 / The improved custom picture menu gives you even C200B camera (A 137). more options to control the “look” of your images. Select one of the preset picture settings or set the •...
Table of Contents 1. Introduction 9 Preparing Recording Media 47 Compatible Recording Media 47 About this Manual 9 Inserting a CFast Card 48 Conventions Used in this Manual 9 Removing a CFast card 48 Supplied Accessories 11 Inserting and Removing an SD Card 49 Names of Parts 12 Initializing Recording Media 50 LM-V1 LCD Monitor and LA-V1 LCD Attachment...
Page 6
Exposure Compensation - AE Shift 75 Recording 108 Light Metering Mode 76 Using Metadata 109 White Balance 77 Setting a User Memo Created with Canon XF Custom White Balance 77 Utility 109 Color Temperature/Preset White Balance 78 Entering Information About the Recording 110...
Page 7
5. Playback 139 7. Network Functions 161 Playback 139 About the Network Functions 161 Clip Index Screen 139 Connecting to a Wi-Fi Network 162 Playing Back Clips 141 Camera Access Point 163 Onscreen Displays 141 Connecting in Infrastructure Mode 164 Wi-Fi Protected Setup (WPS) 165 Playback Controls 143 Searching for Access Points 166...
Introduction About this Manual Thank you for purchasing the Canon EOS C200 / EOS C200B*. Please read this manual carefully before you use the camera and retain it for future reference. Should the camera fail to operate correctly, refer to Troubleshooting (A 206).
Page 10
About this Manual The arrow is used to abbreviate steps in Operating modes procedures. For a detailed explanation on how A shaded icon (like ) indicates that the function to use the menus, refer to Using the Menus described can be used in the operating mode shown (A 33).
About the lens kit: At the time of purchase, the lens kit is supplied with a lens (model number is on the product box). Visit your local Canon website to download its instruction manual. Please note that the lens is also sold separately so the supplied accessories listed in that instruction manual differ slightly from the accessories supplied with the lens kit.
Names of Parts Names of Parts 16 17 18 19 1 Tape measure hook and focal plane mark 12 SHUTTER (shutter speed mode) button (A 67)/ 2 MAGN. (magnification) button (A 83)/ Assignable button Camera 6 (A 125) Assignable button Camera 1 (A 125) 13 CFast card slot cover switch 3 PEAKING button (A 83)/ 14 CFast access indicator...
Page 13
Names of Parts 1 INPUT 1 terminal (XLR) (A 98) 11 Screw holes for the microphone holder fixation 2 INPUT 2 terminal (XLR) (A 98) bolts 3 SDI terminal (A 149, 152) 12 MIC (microphone) terminal (A 98) 4 × (headphone) terminal (A 104) 13 Audio input selection switches for INPUT 1 and 5 USB terminal (A 111, 158) INPUT 2 (A 99)
Page 14
Names of Parts EF lens mount 1 Tally lamp (A 56) 6 EF-S lens mount index (A 37) 2 VIDEO terminal (A 28) 7 Lens release button (A 37) 3 PUSH AUTO IRIS (momentary automatic aperture) 8 EF lens lock pin (A 37) button (A 74)/ 9 EF lens contacts (A 37) Assignable button Camera 10 (A 125)
Page 15
Names of Parts 1 Eye sensor (A 40) 12 Audio level dials for CH1 (top) and CH2 (bottom) 2 Viewfinder (A 40, 41) (A 101) 3 Dioptric adjustment lever (A 40) 13 SD card slot A (left) and B (right) covers (A 48) 4 Tally lamp (A 56) 14 SD card slots (A 49) 5 FUNC (main functions) button (A 66)/...
Page 16
Names of Parts 6 7 8 1 Tape measure hook 5 Screw hole for 3/8"-16 mounting screws (10 mm Use the hook to accurately measure the distance (0.39 in.) deep) (A 42) from the focal plane. 6 TB-1 Tripod Base 2 Accessory socket 7 Tripod socket for tripods with 0.95 cm (3/8 in.) For mounting accessories with 1/4"-20 screws...
Names of Parts LM-V1 LCD Monitor and LA-V1 LCD Attachment Unit Supplied accessory for the C200; optional accessory for the C200B. 1 LCD panel with touch screen (A 40, 41) 7 DISP (display) button (A 57, 141)/ 2 FUNC (main functions) button (A 66)/ Assignable button Monitor 2 (A 125) 8 Í...
4 Joystick (A 33)/SET button (A 33) 8 Grip attachment ring (A 43) 5 FOCUS GUIDE button (A 82)/ 9 Grip connection cable (A 43) Assignable button Grip 1 (A 125) 10 Connection plug (A 43) Supplied accessory for the C200; optional accessory for the C200B.
3 Top accessory shoe unit to the camera (A 28) 4 Through-holes (∅ 8.8 mm (0.35 in.)) Supplied accessory for the C200; optional accessory for the C200B. With socket for 0.64 cm (1/4") screws Microphone Holder 1 Microphone lock screw (A 98)
4K Workflow Overview 4K Workflow Overview The following illustrates the typical 4K workflow for this camera. Operating modes: Recording Post-production Full-quality recording data HDMI OUT External 4K terminal recorder 4K recording YCbCr 4:2:0 Full-quality (XF-AVC) data data SD card Full-quality 4K recording data 4K RAW...
4K Workflow Overview Color Grading with the ACES Workflow Post-production OpenEXR (ACES 1.0) data Cinema RAW Color grading Development CFast card Input ASC- Transform MP4 or SDI terminal XF-AVC data Input SD card Transform ACESproxy Output Transform Output Inverse log ASC-CDL Transform On-set Color Grading...
Preparations Preparing the Power Supply You can power the camera using a battery pack or directly using the AC adapter. If you connect the AC adapter to the camera while a battery pack is attached, the camera will draw power from the power outlet. Using a Battery Pack You can power the camera using the supplied BP-A30 Battery Pack or the optional BP-A60 Battery Pack.
Page 24
Preparing the Power Supply Differentiating the Supplied Power Cords (for North America) The CA-A10 AC Adapter and CA-CP200B Compact Power Adapter each include a power cord. The plug for the CA-A10’s power cord has a socket with a straight side, while the plug for the CA-CP200B’s power cord has circular sockets.
Page 25
Preparing the Power Supply Attaching the Battery Pack 1 Set the Q switch to OFF. 2 Insert the battery pack all the way into the compartment as shown in the illustration and press it gently toward the left until it clicks. Removing the Battery Pack 1 Set the Q switch to OFF.
Preparing the Power Supply Checking the Remaining Battery Charge When the camera is turned on, you can check the approximate remaining battery usage time (in minutes) by looking at any recording/playback screen or the [Battery/Hour Meter] status screen (A 202). You can also check the approximate charge level on the battery pack itself.
Preparing the Power Supply Connecting the CA-A10 AC Adapter 1 Set the Q switch to OFF. 2 Connect the AC adapter’s DC plug to the DC IN terminal on the camera. • Align the cable so the red dot on the plug is facing •...
Adjusting the LCD Screen or Viewfinder (A 40) and (A 41). Supplied accessory for the C200; optional accessory for the C200B. Attaching the LCD Monitor To attach the LCD monitor to the handle unit 1 Set the Q switch to OFF.
Page 29
VIDEO terminal to the LCD monitor’s VIDEO terminal ( ). Supplied accessory for the C200; optional accessory for the C200B. • Align the Í marks on the cables’ plugs and terminals. • Put the cable though the LCD attachment unit’s cable clamp ( ).
Page 30
, connect the camera’s VIDEO terminal to the LCD monitor’s VIDEO terminal ( ). Supplied accessory for the C200; optional accessory for the C200B. • Align the Í marks on the cables’ plugs and terminals. Removing the LCD Monitor and LCD Attachment Unit 1 Set the Q switch to OFF.
Date, Time and Language Settings Date, Time and Language Settings Setting the Date and Time You will need to set the date and time on the camera before you can start using it. When the internal clock is not set, or if the settings were lost because the lithium button battery is depleted, the [Date/Time] screen will appear automatically with the time zone selected when you turn on the camera.
Date, Time and Language Settings Changing the Language The camera’s default language is English. You can change it to German, Spanish, French, Italian, Polish, Portuguese, Russian, Simplified Chinese, Korean or Japanese. Please note that some settings and screens will be displayed in English, regardless of the language setting. Operating modes: 1 Press the MENU button.
Using the Menus Using the Menus Many of the camera’s functions can be adjusted from the menu that opens after pressing the MENU button. In mode, you can also register frequently used menu settings in a customized submenu (My Menu) for Menu Options easy access.
Using the Menus 4 Push the joystick left/right to select the desired “page” number and then up/down to select the desired menu item. 5 Press the joystick. • Setting options will appear with a Ð mark next to the currently selected option. 6 Push the joystick up/down to select the desired setting option and then press the joystick.
Page 35
Using the Menus Rearranging Menu Settings 1 Open the My Menu [Move] screen. > [¥ My Menu] * > [Edit] > [Move] * Each My Menu set appears on a different page. Select the page that corresponds to the desired set. 2 Push the joystick to select the setting you want to move and then press the joystick.
, thumb rest, eye cup , etc. Supplied accessory for the C200; optional accessory for the C200B. Configuring the Modular Units Your camera is nothing if not versatile and you can choose the configuration that best fits your needs and shooting conditions.
Preparing the Camera • You can use the optional RD-1 Rod Clamp to use the camera with a commercially available viewfinder or other accessories with a ∅ 15 mm (0.59 in.) rod. RD-1 Rod Clamp (optional) Preparing the Lens As much as possible, attach and remove the lens quickly and in a clean environment free of dust. Refer also to the instruction manual of the lens used.
Page 38
EF lenses, visit your local Canon website. Operating modes: 1 Download the lens firmware update file from the Canon website and save it on an SD card. Insert the SD card containing the lens firmware update into SD card slot B.
Page 39
• If correction data is not available, the corresponding menu option will appear grayed out. Visit your local Canon website and check if there is correction data available for the lens you are using. If so, download the necessary update package and upgrade the camera’s firmware following the instructions supplied therein.
Preparing the Camera Using the LCD Monitor You can rotate and position the LCD monitor in a number of ways to match your shooting style. 1 Rotate the LCD monitor mount 90° toward the lens. • Make sure LCD attachment unit alignment mark (on LCD attachment unit pivot A) and –...
Preparing the Camera IMPORTANT • Pointing the viewfinder lens at the sun or other strong light sources may cause damage to internal components. When you are not using the viewfinder, make sure to attach the viewfinder cap to the viewfinder. This will also protect the viewfinder from scratches and dirt.
Preparing the Camera Setting the Screen to Black & White The viewfinder and LCD screen display in color by default but you can set them to black & white. Even when the screen is black & white, onscreen text and icons will still be displayed in color. Operating modes: 1 Open the display selection menu for the viewfinder or LCD screen.
Removing and Attaching the GR-V1 Camera Grip The camera grip comes originally attached to the C200; it is an optional accessory for the C200B. You can remove it and replace it with the thumb rest should the minimal configuration be necessary.
(“crosshead”) screwdriver to secure it firmly with the supplied M4 bolts. Attaching the Shoulder Strap The SS-1200 Shoulder Strap is supplied with the C200 while it is an optional accessory for the C200B. Pass the ends through the strap mount and adjust the length of the strap.
Preparing the Camera Removing and Attaching the Terminal Covers You can remove the covers of the camera’s terminals to access them more easily. Removing the Terminal Covers Open the terminal cover and gently pull it straight out. Attaching the Terminal Covers Insert the connecting strip into the opening to attach the terminal cover.
CL-V2 Clamp Base. The assistance functions that can be output to the LCD monitor through the VIDEO terminal will also be output to the EVF-V70. Supplied accessory for the C200; optional accessory for the C200B. 1 Attach the handle unit (A 28).
The SD card is used also to save custom picture files and menu settings files. Compatible Recording Media The following types of memory card can be used with this camera. For the latest information about recording media tested for use with this camera, visit your local Canon website. CFast cards CFast 2.0-compliant cards.
Preparing Recording Media Inserting a CFast Card 1 Slide the CFast card slot cover switch in the direction of the arrow. • The CFast card slot cover will open. 2 Insert the CFast card straight, with the label facing the SD card slots, all the way into the slot.
Preparing Recording Media Inserting and Removing an SD Card You can insert an SD card into SD card slot A or slot B. If you have two SD cards, you can use both slots. 1 Open the SD card slot cover. 2 Insert the SD card, with the label facing the right side of the camera (the side with the air intake vent), all the way into the SD card slot until it clicks.
Preparing Recording Media Initializing Recording Media The first time you use a recording media with this camera, initialize it first. You can also initialize a recording media to permanently delete all the data it contains. Operating modes: 1 Open the [Initialize Media] submenu. >...
Preparing Recording Media Relay Recording and Double Slot Recording The camera features two convenient recording methods that can be used when both SD card slots contain an SD card: relay recording and double slot recording. Relay recording: This function allows you to continue recording on another SD card without interruption if the SD card you are using becomes full.
Preparing Recording Media Recovering Clips Some actions, such as suddenly turning off the camera or removing the recording media while data is being recorded, can cause data errors in the recorded clip. Operating modes: 1 Open the index screen with the clip you wish to recover (A 139). 2 Select the desired clip (a clip with the icon instead of a thumbnail image) and then press the joystick.
Adjusting the Black Balance Adjusting the Black Balance You can have the camera adjust the black balance automatically when ambient temperature changes considerably or if there is a noticeable change in a true black video signal. Operating modes: 1 Attach the body cap to the lens mount. •...
Recording Recording Video Recording Audio This section explains the basics of recording clips*. For details on recording audio, refer to (A 96). Before making important recordings for the first time, make test recordings using the video configuration(s) you plan to use to check that the camera operates correctly. Should the camera fail to operate correctly, refer to Troubleshooting (A 206).
- Do not open the card slot cover of the card being accessed and do not remove the card. - Do not disconnect the power source or turn off the camera. • Be sure to save your recordings regularly (A 158), especially after making important recordings. Canon shall not be liable for any loss or corruption of data.
Recording Video Locking the Controls in Recording Mode mode, you can set the Q switch to C Once in (key lock) to lock all the physical controls (buttons and switches) on the camera, save for the REC button*. This is useful in preventing settings from being changed due to inadvertently pressing one of the buttons.
Page 58
Recording Video Left side of the screen Icon/Display Description Custom Display Recording media status, estimated remaining recording time and recording format 2: [Remaining Rec Time] ;, 0000 min, END CFast card status: in green - can record (RAW clips); in white - reading the CFast card;...
Page 59
Recording Video Top of the screen Icon/Display Description Custom Display Network functions: 2: [Network Functions] Network connection status: in white - function ready to be used; in yellow - connecting to or disconnecting from a network; in red - error has occurred. Double slot recording (A 51) 2: [Recording Mode] Recording operation:...
Page 60
Recording Video Icon/Display Description Custom Display Date/time 2: [Date/Time] CH0/CH0 Audio output channels (A 157) 2: [Monitor Channels] è é Remaining battery charge 2: [Remaining Battery] ê ë The icon shows an estimate of the remaining charge. The remaining recording time is (in red) displayed, in minutes, next to the icon.
Recording Video Setting the Clip File Name The camera allows you to change several settings that determine the clip file name of recorded RAW and XF-AVC clips. Personalize the clip file name according to your preferences or organizational conventions to create files that are easier to identify and organize.
2 Select [Change] and then press the joystick. • Select [Reset] and then press the joystick to reset the user-defined field to [CANON]. 3 Push the joystick up/down to select the first character and then press the joystick to move to the next.
Recording Video NOTES NOTES • Each folder can contain up to 500 recordings. When that number is exceeded, a new folder is created automatically. Using the Fan The camera uses an internal cooling fan to reduce the camera’s internal heat. In mode, you can change the fan’s operation mode and speed.
Video Configuration: Video Format, System Frequency, Frame Rate and Resolution Video Configuration: Video Format, System Frequency, Frame Rate and Resolution With the following procedures you can set the video configuration used for main recording clips. Select the video format, system frequency, frame rate, resolution (frame size) and color sampling settings that best match your creative needs.
Video Configuration: Video Format, System Frequency, Frame Rate and Resolution Selecting the Resolution and Color Sampling Settings Operating modes: * For RAW clips, the resolution is set to 4096x2160 and cannot be changed. 1 Open the [Resolution/Color Sampling] submenu. > [Æ " Recording/Media Setup] > [Resolution/Color Sampling] 2 Select the desired option and then press the joystick.
Changing Main Camera Functions with the FUNC Button Changing Main Camera Functions with the FUNC Button You can adjust three main camera functions—shutter speed, white balance and ISO speed/gain—using the FUNC button (direct setting mode). This section will explain the basic operation of the direct setting mode. For specific details about the functions refer to the each function’s section: shutter speed (A 67), white balance (A 77), ISO speed/gain (A 69).
Shutter Speed Shutter Speed Set the shutter speed based on the recording conditions. For example, you may want to set slower shutter speeds in darker environments. The camera offers the following modes. You can also perform this function remotely using Browser Remote on a connected network device (A 170). Operating modes: [Speed]: Allows you to set the shutter speed (in fractions of a second).
Shutter Speed Changing the Shutter Speed Mode and Value You can also perform this function remotely using Browser Remote on a connected network device (A 170). 1 Open the shutter speed [Shutter Mode] submenu. > [v " Camera Setup] > [Shutter Mode] 2 Select the desired mode and then press the joystick.
The minimum sensitivity needed to obtain the recommended dynamic range is ISO 400 / 6 dB gain (when the [Gamma] setting in the custom picture file (A 133) is set to [Canon Log] or [Wide DR]) or ISO 800 / 12 dB gain (when it is set to [Canon Log 3]).
You will need to set in advance the function of one of the control dials to [ISO/Gain]. You can select the function assigned to each control dial independently. Supplied accessory for the C200; optional accessory for the C200B. Control dial Assigning ISO Speed/Gain Control to a Control Dial...
ND Filter ND Filter Using the ND filter allows you to open up the aperture to obtain a shallower depth of field even when recording in bright surroundings. You can also use the ND filter to avoid the soft focus caused by diffraction when using small apertures.
Browser Remote (A 170) to temporarily adjust the aperture automatically. Automatic aperture: The camera adjusts the aperture automatically. Supplied accessory for the C200; optional accessory for the C200B. Required settings on EF Cinema lenses To adjust the aperture from the camera, you will need to enable automatic adjustment using the controls on the lens.
Page 73
Adjusting the Aperture Changing the aperture mode and value 1 Open the [Iris Mode] submenu. > [v ! Camera Setup] > [Iris Mode] • This setting is available only when an EF lens compatible with automatic aperture is attached to the camera. For non- compatible lenses, the aperture mode will be set to [Manual] and cannot be changed.
Adjusting the Aperture Momentary Automatic Aperture - Push Auto Iris During manual aperture, you can press the PUSH AUTO IRIS button to have the camera temporarily take control and automatically adjust the aperture for an optimal exposure. You can also perform this function remotely using Browser Remote on a connected network device (A 170).
Adjusting the Aperture Exposure Compensation - AE Shift Use AE shift to compensate the exposure that was set using automatic aperture, in order to darken or lighten the image. You can also perform this function remotely using Browser Remote on a connected network device (A 170). 1 Open the [AE Shift] submenu.
Adjusting the Aperture Light Metering Mode Select the light metering mode to match the recording conditions. Using the appropriate setting will ensure that the camera obtains the most suitable exposure level when automatic aperture is used. 1 Open the [Light Metering] submenu. >...
White Balance White Balance The camera uses an electronic white balance process to calibrate the picture and produce accurate colors under different lighting conditions. There are 4 methods of setting the white balance. You can also perform this function remotely using Browser Remote on a connected network device (A 170). Custom white balance: You can use a gray card or white object with no pattern to establish the white balance and set it to one of two custom white balance positions, ÅA or ÅB.
White Balance Å 4 Press the button. • The Å A or Å B icon will flash quickly. • Make sure the gray card or white object fills the screen until the procedure is completed. • Once the icon stops flashing, the procedure is completed. The setting is retained even if you turn off the camera.
White Balance Auto White Balance (AWB) The camera constantly adjusts the white balance automatically to achieve an optimal level. The camera will adjust the white balance if the light source changes. 1 Press the WB button. • The white balance mode icon will be highlighted in orange. •...
Note that some methods allow you to operate aspects of the focus by touching the LCD screen Not available when a manual focus lens is attached to the camera. Supplied accessory for the C200; optional accessory for the C200B. Operating modes:...
Dual Pixel Focus • For details on using the focus guide, refer to Guide (A 82). Supplied accessory for the C200; optional accessory for the C200B. 5 Turn the focus ring to adjust the focus. NOTES NOTES • With some EF lenses, you may be able to operate the focus ring even when the focus mode switch is set to •...
Page 82
• You can display a secondary focus frame using the Guide 2nd Frame] setting. When both focus frames are displayed on the screen, you can press the joystick to switch the focus guide between them. Supplied accessory for the C200; optional accessory for the C200B. Focus farther Focus farther...
Page 83
3 Press the MAGN. button again to cancel the magnification. If one of the AF frames or a face detection frame is displayed on the screen, the area around the active frame will be magnified instead. Supplied accessory for the C200; optional accessory for the C200B. NOTES NOTES •...
Adjusting the Focus One-Shot AF In this focus mode, you will focus manually in most situations but still have the option to have the camera focus automatically only once on the subject inside the AF frame that appears on the screen. You can also change the size and position of the AF frame.
• When using autofocus with compatible EF lenses, you can change various aspects of the autofocus function with the following settings. Visit your local Canon website for the latest information. > [v $ Camera Setup] > [Apply AF Speed Limit] to select whether the selected AF speed is applied at all times or only while recording.
- When an ISO speed or gain value in the extended range is selected (A 69). - When the [Gamma] setting in the custom picture file (A 133) is set to one of the Canon Log settings or [Wide DR].
Adjusting the Focus Face Detection When the face detection function is activated, the camera will detect people’s faces. When there are a number of people in the picture, one person will be determined to be the main subject but you have the option to select a different person as the main subject.
Adjusting the Focus NOTES NOTES • In certain cases, faces may not be detected correctly. Typical examples include: - Faces extremely small, large, dark or bright in relation to the overall picture. - Faces that are turned to the side, at a diagonal, partially hidden or upside-down. •...
You can also zoom remotely using Browser Remote on a connected network device (A 170). Supplied accessory for the C200; optional accessory for the C200B. Required settings on EF Cinema lenses To operate the zoom from the camera, you will need to enable automatic adjustment using the controls on the lens.
Onscreen Markers and Zebra Patterns Onscreen Markers and Zebra Patterns Using onscreen markers allows you to make sure your subject is correctly framed and is within the appropriate safe area. The zebra patterns help you identify areas that are overexposed. The onscreen markers and zebra pattern will not affect your recordings.
Onscreen Markers and Zebra Patterns To set the aspect ratio 1 Select [Marker Aspect Ratio], select the desired option and then press the joystick • If you selected one of the preset aspect ratios, the rest of the procedure is not necessary. If you selected [Custom], continue the procedure to set the desired aspect ratio.
Setting the Time Code Setting the Time Code mode, the camera generates a time code signal and records it with the recorded clips. The time code signal can be output from the SDI terminal and HDMI OUT terminal. In mode, the time code embedded in the clip being played back can be output from the SDI terminal.
Setting the Time Code Setting the Time Code’s Initial Value If you set the time code mode to [Preset], you can set the initial value of the time code. 1 Open the [Set Time Code] submenu. > [B # System Setup] > [Set Time Code] 2 Select [Change] and then press the joystick.
Page 94
Setting the Time Code About the Time Code Display An icon may appear next to the time code depending on the operation. Refer to the following table. Icon Description The time code mode is set to [Regen.]. The time code mode is set to [Preset] and the running mode is set to [Rec Run]. The time code mode is set to [Preset] and the running mode is set to [Free Run].
Setting the User Bit Setting the User Bit The user bit display can be selected from the date or the time of recording, or an identification code consisting of 8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the letters A to F.
Recording Audio Recording Audio The camera features 4-channel linear PCM and 2-channel MPEG-2 AAC-LC audio recording and playback. The sampling frequency is 48 kHz and the audio sampling bit depth depends on the recording format. You can record audio using the INPUT terminals (commercially available microphones, analog line-in audio sources, AES/ EBU digital audio sources), the MIC terminal (commercially available microphones) or the built-in monaural microphone An audio signal will also be output with the video signal from the SDI terminal and HDMI OUT terminal.
Page 97
Recording Audio Audio input selection Recorded audio channels/audio sources [Select CH1/ [Select CH3/ switches [CH2 Input] CH2 Input] CH4 Input] for INPUT 1 for INPUT 2 [INPUT [MIC Terminal] AES/EBU – – INPUT 1 terminal (digital audio) MIC terminal (L) MIC terminal (R) Terminals] [INPUT...
Recording Audio Connecting an External Microphone or External Audio Input Source to the Camera To each of the INPUT terminals you can attach commercially available microphones, digital audio sources (AES/ EBU), or analog line in sources with an XLR connector. To the MIC terminal you can attach commercially available condenser microphones with their own power supply, and a ∅...
Recording Audio Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals Using the INPUT 1/INPUT 2 terminals, you can record audio independently from a microphone or audio input source. On the camera, set the audio-related switches for the INPUT terminal you wish to use according to the type of audio input you INPUT 1/ INPUT 2...
Recording Audio NOTES NOTES • When shooting XF-AVC (primary or proxy) clips, the audio format is 4-channel linear PCM with an audio sampling bit depth of 24 bit. Selecting the Audio Input Source for Audio Channels You can select the audio input source that will be recorded on CH1/CH2 or CH3/CH4, independently for each pair of audio channels.
Recording Audio Adjusting the Audio Recording Level When a channel is set to an analog audio input, you can select the automatic audio recording level adjustment or adjust the audio level manually, independently for each channel. When a channel is set to a digital audio source or the built-in monaural microphone, the audio recording level cannot be adjusted.
Recording Audio Audio Level Adjustment for CH3 or CH4 To adjust audio levels for CH3 and CH4, set the recording format to RAW or XF-AVC, or set it to MP4 and then > [3 " Recording/Media Setup] > [Audio Format (MP4)] to [LPCM 16 bit 4CH] in advance. 1 Open the [Audio Rec Level CH3], [Audio Rec Level CH4] or [Audio Rec Level CH3/CH4] submenu.
Page 103
Recording Audio 2 Select the desired level and then press the joystick. • You can select one of 5 sensitivity levels from –12 dB to +12 dB. Activating the Microphone’s Attenuator (INPUT Terminals) When the INPUT 1 or INPUT 2 switch is set to MIC or MIC+48V and the INPUT switch of the terminal is set to ANALOG, you can activate the external microphone’s attenuator (20 dB).
Recording Audio Monitoring the Audio with Headphones × (headphone) terminal Connect headphones with a ∅ 3.5 mm stereo mini-plug to the × (headphone) terminal to monitor the recorded audio. NOTES NOTES > [¡ $ Audio • You can adjust the headphone volume with the >...
Colors Bars/Audio Reference Signal Colors Bars/Audio Reference Signal You can have the camera generate color bars and a 1 kHz audio reference signal and output them from the , SDI terminal, HDMI OUT terminal and × (headphone) terminal VIDEO terminal, viewfinder only.
Waveform Monitor Waveform Monitor The camera can display a simplified waveform monitor. You can select one of 6 types of monitors and also adjust the waveform amplification. Operating modes: Displaying the Waveform Monitor Press the WFM button. • The waveform monitor window will appear on the right of the screen.
Page 107
[HDR: Off], the other settings in the same screen to an option other than [LUT: Off], and then one of the following: > [ ! Custom Picture/HDR] > [Preset] to [Canon Log 3] or [Canon Log]. > [ ! Custom Picture/HDR] > [Gamma] to [Canon Log 3] or [Canon Log].
Adding Marks to Recordings Adding Marks to Recordings While recording XF-AVC clips, you can flag an important shot by adding a “shot mark” (!). After recording, you can also add an OK mark ($) or check mark (%) to the entire clip to flag clips you want to set apart. You can also perform this function remotely using Browser Remote on a connected Wi-Fi device (A 170).
Setting a User Memo Created with Canon XF Utility Before you can add a user memo, you must first install Canon XF Utility (A 158). Next, create the user memo and then save it to an SD card. Once you insert the SD card in the camera and select the user memo, it will be added to clips you record.
Using Metadata Entering Information About the Recording You can enter scene and take information to help identify the recording later on. 1 Open the [Scene] or [Take] submenu. > [3 $ Recording/Media Setup] > [Metadata] > [Scene] or [Take] 2 Select [Change] and then press the joystick. •...
When the optional GP-E2 GPS Receiver is connected to the camera’s USB terminal, the camera will automatically record the GPS information (longitude, latitude and altitude) to clips and photos you record. Later, the GPS information can be used to organize and search clips using Canon XF Utility (A 158). In mode, you can check if a clip contains GPS information on the [Clip Info] screen (A 145).
Reviewing a Recording Reviewing a Recording If you set an assignable button to [Review Recording] in advance, you can review all or part of the last clip recorded even with the camera set to mode. Operating modes: 1 Set an assignable button to [Review Recording] in advance (A 125). 2 Open the [Review Recording] submenu to set the review length.
Simultaneous Recording of Proxy Clips Simultaneous Recording of Proxy Clips In addition to a primary clip recorded in RAW on a CFast card, you can simultaneously record the same scene as a proxy clip (in MP4 or XF-AVC format) on an SD card. Because proxy clips are relatively smaller files, they are suitable for offline editing.
Special Recording Modes Special Recording Modes The camera features the following special recording modes. Slow motion recording: This mode allows you to change the shooting frame rate to achieve a slow motion effect during playback. Pre-recording: The camera will start recording a few seconds before you press the REC button. This is especially useful when it is difficult to predict when to start recording.
Special Recording Modes 3 Press the REC button to begin recording. • The tally lamp illuminates. • [SLOW STBY] changes to [Ü SLOW REC] while recording. 4 Press the REC button again to stop recording. • The clip is recorded at the selected frame rate. •...
Special Recording Modes • About the time code during pre-recording mode: - The time code of the clip will start a few seconds before the REC button was pressed. - The time code will be recorded with the running mode set to [Free Run]. - If the time code mode was set to [Regen.], or to [Preset] with [Rec Run] running mode, the time code running mode will be changed automatically to [Free Run] when pre-recording is activated.
Special Recording Modes Interval Recording Mode Set the interval in advance. At each interval, the camera will record one frame. Sound is not recorded in this mode. Operating modes: Activating and Configuring 1 Open the [Recording Mode] submenu. > [Æ ! Recording/Media Setup] > [Recording Mode] 2 Select [Interval Recording] and then press the joystick.
Special Recording Modes Continuous Recording Once the continuous recording starts, the camcorder will keep recording continuously until you access the menu to stop it. This will create a backup recording to make sure you do not miss any shooting opportunities. In this mode, video and audio are recorded on both cards.
Page 119
Special Recording Modes 4 To stop the continuous recording, open the [Continuous Recording] submenu. > [Æ ! Recording/Media Setup] > [Continuous Recording] 5 Select [STBY] and then press the joystick. • The tally lamp goes out and recording stops on both SD cards. [ÜCONT REC'7] and [REC'6] change to [CONT STBY'7] and [STBY'6], respectively.
Taking Photos Taking Photos Photos are saved onto SD card B and their size depends on the video configuration currently in use. Resolution currently in use Photo size Approximate file size per image 4096x2160 2048x1080 930 KB 3840x2160 3840x2160 3,080 KB 1920x1080 1920x1080 880 KB...
Photo Playback Photo Playback You can view the photos that you took with the camera. Photos can be played back only from SD card B. Operating modes: Displaying the [Photos] Index Screen Display the [Photos] index screen to view photos. 1 Set the switch to MEDIA.
Deleting Photos Deleting Photos You can delete a photo you no longer need. Photos can be deleted one at a time from the photo playback screen. Operating modes: The basic operation of the photo menu is identical to that of the clip menu (A 144). 1 Select the photo you wish to delete.
Using the Optional RC-V100 Remote Controller Using the Optional RC-V100 Remote Controller You can connect the optional RC-V100 Remote Controller to the camera’s REMOTE terminal in order to control the camera (including advanced recording functions) from a distance. The remote controller lets you turn the camera on, navigate the menus and remotely control the aperture and shutter speed, change picture-related settings like the knee and sharpness, and more.
Page 124
Using the Optional RC-V100 Remote Controller...
In most cases, the names of the buttons printed on the camera and modular units also indicate their default settings. Supplied accessory for the C200; optional accessory for the C200B. Operating modes: On the LCD monitor...
Assignable Buttons 2 Select the desired function and then press the joystick. • The selected function will be assigned to the selected button. • If you selected one of the preset functions, the rest of the procedure is not necessary. If you selected [User Setting], continue the procedure to register a menu setting.
Page 127
Assignable Buttons Function name Description Ü [AE Shift +] Compensates the exposure making the image brighter. – Ü [AE Shift –] Compensates the exposure making the image darker. – Ü [Backlight] Turns the [Backlight] light metering option on/off. – Ü [Spotlight] Turns the [Spotlight] light metering option on/off.
Page 128
Assignable Buttons Function name Description Ü Ü [Headphones +] Increases the headphone volume. Ü Ü [Headphones –] Reduces the headphone volume. Ü Ü [Monitor Channels] Switches the audio output channel. Ü Ü [Audio Level Indicator] Turns the audio level meter on/off. Enters the direct setting mode, replicating the function of the camera’s FUNC Ü...
SD card B. NOTES • Custom picture files are exclusively compatible for use only with C200 / C200B cameras. Selecting Custom Picture Files Select a custom picture file to apply its settings to your recordings or to edit, rename, protect, or transfer it.
- There are also other LUTs available that can be applied for processing in post-production. For the latest information on available LUTs, please visit your local Canon website. • About changing custom picture related settings using the optional RC-V100 Remote Controller - If a protected custom picture file is selected on the camera, custom picture related settings cannot be changed using the remote controller.
Custom Picture Settings 3 Select the destination file and then press the joystick. • Select an existing custom picture file to overwrite it or, if this option is available, select [New File] to save the settings as a new custom picture file on SD card B. 4 Select [OK] and then press the joystick.
[Neutral]: Reproduces neutral colors. [Production Camera]: Reproduces colors more suitable for motion picture production. [Cinema EOS Original]: Color matrix developed by Canon, designed to reproduce the 4K output of an EOS C500 camera using the BT.709 color space. [Video]: Reproduces the colors of an EOS C300/EOS C500 camera with no custom picture settings applied.
Page 134
–50 to 50 (±0) Increases or decreases the black level. Higher settings will make dark areas brighter but decrease contrast. When [Gamma] is set to one of the Canon Log settings, this setting has no effect on the picture. [Master Black Red], –50 to 50 (±0)
Page 135
0 (no slope), 1 (steep slope) to 3 (gradual slope) (1) These settings allow you to adjust the sharpness of only the areas above the knee point. When [Gamma] is set to one of the Canon Log settings or [Wide DR], these settings have no effect on the picture.
Page 136
–50 to 50 (±0) Adjusts the black level set by the [Black] > [Master Pedestal] setting. When [Gamma] is set to one of the Canon Log settings, this setting has no effect on the picture. [Over 100%] [Through], [Press], [Clip] Determines how the camera handles video signals exceeding 100%.
After you adjust settings in the various menus, you can save those settings in the camera or on SD card B. You can load those settings at a later date or on another C200 / C200B camera so that you can use that camera in the exact same way.
Page 139
Playback Playback This section explains how to play back clips with the camera. For details on playing back clips using an external monitor, refer to Connecting to an External Monitor or Recorder (A 152). For details on viewing photos on the Viewing Photos SD card, refer to (A 121).
Page 140
Playback 1 Shot mark (A 108) 8 Network icon 2 $ mark/% mark (A 108) Appears when transferring a clip to an FTP server. 3 Orange selection frame 9 Clip number / Total number of clips 4 Clip identification (camera index, reel number and 10 Recording date (month and day only) and time clip number) (A 61) 11 Clip’s start time code...
Page 141
Playback Playing Back Clips After you select a clip to play back from the index screen, you can control the playback with the buttons on the camera (play/pause/stop only) or with the joystick and onscreen joystick guide (A 143). 1 Move the orange selection frame to the clip you want to play back.
Page 142
Playback 1 High temperature warning (A 207) 10 Time code (A 92) 2 Fan operation (A 63) 11 Clip number / Total number of clips 3 Shutter speed (A 67) 12 Color depth and resolution (A 64) 4 Joystick guide (A 143) Color sampling and resolution are displayed for 5 Recording media MP4 and XF-AVC clips.
Page 143
Playback Playback Controls The following playback types are available using the onscreen joystick guide and any of the joysticks. Playback type Operation During playback, push the joystick up or down. Fast playback Repeat to increase the playback speed to approximately 5x 15x 60x the normal speed. Frame advance/reverse During playback pause, push the joystick up or down.
Page 144
Clip Operations Clip Operations Besides playing back a clip, you can perform other operations such as deleting a clip or displaying clip information. This is done through the clip menu, which contains different functions depending on the index screen. Refer to the following table for available functions and refer to the following pages for more details of the functions.
Page 145
Clip Operations Displaying Clip Information Operating modes: Select [Display Clip Info] in the clip menu to display the selected clip’s information screen ([Clip Info] screen). Push the joystick left/right to switch to the previous/next clip. When you have finished, press the CANCEL button to return to the clip index screen.
Page 146
Clip Operations Adding $ Marks or % Marks You can add an OK mark ($) or check mark (%) to XF-AVC clips to help you identify particular clips for a future purpose. Furthermore, you cannot delete clips with an $ mark so you can use this mark also to protect important clips.
Page 147
Clip Operations Adding Shot Marks During playback, you can add a shot mark (!) to frames that you want to set apart in an XF-AVC clip. Operating modes: Adding Shot Marks during Playback To add a shot mark to a clip during playback or playback pause, you must first set an assignable button to [Add Shot Mark] in advance.
Page 148
Clip Operations Deleting the User Memo and GPS Information Operating modes: 1 Open the [XF-AVC] index screen, select the desired clip and then press the joystick to open the clip menu. 2 Select [Delete User Memo] and then press the joystick. •...
Page 149
External Connections Video Output Configuration The video signal output from the SDI terminal and HDMI OUT terminal, depends on the clip’s video configuration and on various menu settings. Output will be from either the SDI terminal or HDMI terminal, and the camera will switch the output automatically.
Page 150
Video Output Configuration Recording video configuration Video output configuration SDI terminal HDMI OUT terminal SDI output Maximum resolution Video SDI/HDMI scan mode SDI/HDMI scan mode Frame rate Resolution format 2048x1080 / 1920x1080 – 3840x2160 1920x1080 – 1920x1080 50.00P 50.00i 50.00P 50.00i 100.00P 1920x1080...
Page 151
Video Output Configuration Clip’s video configuration Video output configuration SDI terminal HDMI OUT terminal SDI output Maximum resolution Video SDI/HDMI scan mode SDI/HDMI scan mode Frame rate Resolution format 2048x1080 / 1920x1080 – 3840x2160 1920x1080 – 1920x1080 3840x2160 1920x1080 3840x2160 YCbCr 4:2:2 YCbCr 4:2:2 1920x1080...
Page 152
Connecting to an External Monitor or Recorder Connecting to an External Monitor or Recorder When you connect the camera to an external device, be it a monitor (to monitor the recording or for playback) or an external video recorder (for recording), use the terminal on the camera that matches the one you wish to use on the monitor.
Page 153
Connecting to an External Monitor or Recorder Setting the 3G-SGI Mapping Level Operating modes: 1 Open the [3G-SDI Mapping] submenu. > [B " System Setup] > [3G-SDI Mapping] 2 Select the desired option and then press the joystick. • You can select a video output signal compliant with Level A or Level B of the SMPTE ST 425-1 standard. Preparations for Recording 2K Video Using an External Recorder You can connect an external video recorder to the camera’s SDI terminal to record 2K video.
Page 154
Connecting to an External Monitor or Recorder Selecting the Output Signal in Mode When the camera is in mode, you can select the maximum resolution output from the HDMI OUT terminal. Operating modes: 1 Open the [HDMI Max Res.] submenu. >...
Page 155
! Custom Picture/HDR] > [Gamma] settings. Available LUTs [Gamma] [LUT: BT.709] [LUT: HDR Assist. (1600%)] [LUT: HDR Assist. (400%)] [LUT: ACESproxy] Ü Ü Ü Ü [Canon Log 3] Ü [Canon Log] – – – [Wide DR] – – – –...
Page 156
! Custom Picture/HDR > Only when [ [Preset] is set to [Canon Log 3]. Available only for SDI output. NOTES • When you apply the [LUT: ACESproxy] LUT to the SDI terminal, it will output ACESproxy video data. Using a compatible monitor, you can perform on-set color grading and check the image after color correction as you continue shooting.
Page 157
Audio Output Audio Output The camera can output audio from the SDI terminal, HDMI OUT terminal, × (headphone) terminal or speaker*. When recording with 4-channel audio, you can select which two channels of the 4 audio channels recorded with the clip will be output from the terminals and speaker. * Only monaural output is available for the speaker.
Page 158
Saving XF-AVC Clips You can use Canon XF Utility to save and organize XF-AVC clips on a computer and the Canon XF plugins to easily use the clips directly from major non-linear editing (NLE) applications. The software and plugins are available as free downloads from your local Canon Web site.
Page 159
Avid Media Composer. Canon RAW Plugin for Final Cut Pro X: Plugin that allows you to easily import RAW clips from a storage device to Apple Final Cut Pro X, directly from within the application. The plugin is available for macOS.
Page 161
• Data transmitted over networks is not encrypted. • Canon shall not be liable for any loss of data or damage resulting from incorrect network configuration or settings. Additionally, Canon shall not be liable for any loss or damage caused by the use of network functions.
Page 162
Connecting to a Wi-Fi Network Connecting to a Wi-Fi Network The camera is Wi-Fi certified and can connect to a Wi-Fi network using an external access point (wireless router) or can itself serve as a Wi-Fi access point. The camera can connect to wireless routers (access points) and network devices compliant with the 802.11a/b/g/n protocol and that are Wi-Fi certified (bear the logo shown on the right).
Page 163
Connecting to a Wi-Fi Network Camera Access Point In this mode the camera itself serves as a wireless access point to which other Wi-Fi-enabled devices can connect. Follow the instructions on the screen to complete the procedure. 1 Open the connection method selection submenu. >...
Page 164
Connecting to a Wi-Fi Network Saving the Configuration 1 Review the access point’s configuration and then press the joystick. • Push the joystick left/right to review additional settings before pressing the joystick. 2 To change the [Network Configuration Name], select [Input] and then press the joystick. •...
Page 165
Connecting to a Wi-Fi Network Wi-Fi Protected Setup (WPS) Wi-Fi Protected Setup (WPS) is the easiest way to set up a Wi-Fi access point. You can do simply by pushing a button (if the access point (wireless router) you want to connect to has a WPS button) or using a PIN code issued by the camera.
Page 166
Connecting to a Wi-Fi Network Searching for Access Points The camera will automatically detect access points in the vicinity. After you select the desired access point, you only need to enter the selected network’s password to connect the camera. For details about the access point’s network name (SSID) and password refer to the wireless router’s instruction manual or consult the network administrator in charge of the access point.
Page 167
Connecting to a Wi-Fi Network Manual Setup If you prefer, you can enter manually the details of the Wi-Fi network you want to connect to. Follow the instructions on the screen to complete the procedure. 1 To enter the [SSID] (network name), select [Input] and then press the joystick. •...
Page 168
Connecting to a Wired (Ethernet) Network Connecting to a Wired (Ethernet) Network Connect the camera to a router or other device connected to a wired (Ethernet) network using a commercially available Ethernet cable. Use Category 5e, shielded twisted pair (STP) Ethernet cables compatible with Gigabit Ethernet (1000BASE-T) and with good shielding capability.
Page 169
Selecting a Network Connection Selecting a Network Connection You can save up to 4 network configuration profiles. If you just saved a new network configuration, it will already be automatically selected so follow this procedure to select a different configuration profile. 1 Open the [Connection Settings] screen.
Page 170
On the Browser Remote screen, you can also check the remaining recording time on the recording media, power source levels and the camera’s time code. * For details about compatible devices, operating systems, Web browsers, etc., please visit your local Canon website. Setting Up Browser Remote You can set a unique camera identification code and designate the port that the Browser Remote application should use when accessing the camera through network.
Page 171
(A 195). * A Web browser that supports JavaScript and is enabled to accept cookies is required. ** For details about compatible devices, operating systems, Web browsers, etc., please visit your local Canon website. Operating modes: Preparations on the camera 1 Set an assignable button to [Status] in advance (A 125).
Page 172
Browser Remote: Controlling the Camera from a Network Device 3 Enter the camera’s URL exactly as shown on the Browser Remote information screen. • Enter the URL you checked previously into the Web browser’s address bar. 4 Enter the user name and password. •...
Page 173
Browser Remote: Controlling the Camera from a Network Device NOTES • The live view image will not be displayed in Browser Remote while color bars are displayed on the camera. • Depending on the network used and the strength of the Wi-Fi signal (for Wi-Fi connections), you may notice delays in the refreshing of the live view image and other settings.
Page 174
Browser Remote: Controlling the Camera from a Network Device 1 Live view screen Shows the camera’s live view image. When the live view image is not turned on, the camera ID and lens information will appear here. 2 Status indicators Wi-Fi connection indicator.
Page 175
Browser Remote: Controlling the Camera from a Network Device 12 Current camera settings This panel displays an overview of the camera settings currently used. You can change camera settings with the controls in the detailed camera settings panel (14) on the right. [ND]: ND filter [WB]: White balance [ISO]/[Gain]: ISO speed or gain value...
Page 176
Browser Remote: Controlling the Camera from a Network Device To change exposure related settings Touch the [Exposure] tab in the detailed camera settings panel. 1 ND Filter buttons • To use the extended ND range options, touch [Extended Range On] or [Extended Range Off].
Page 177
Browser Remote: Controlling the Camera from a Network Device To adjust the focus and use focus-related functions Touch the [Focus] tab in the detailed camera settings panel. To use the following functions, make sure that the focus mode on the lens is set to automatic (A 80).
Page 178
Browser Remote: Controlling the Camera from a Network Device AF-Boosted MF 1 Touch the AF mode button and select [AF-Boosted MF]. • When the focus is in the manual adjustment range, a yellow focus frame will appear on the live view screen. •...
Page 179
Browser Remote: Controlling the Camera from a Network Device Tracking other subjects In addition to Face AF, you can have the camera track other moving subjects that are not faces and also combine the tracking function with one of the autofocus functions to let the camera focus on the desired subject automatically.
Page 180
Browser Remote: Controlling the Camera from a Network Device 1 Clip title Touch/click inside the text box and enter the desired text. To delete the text, touch [Clear All]. 2 GPS information To enter the altitude: Touch inside the [Altitude] text box and enter the desired value. To enter the latitude: Touch inside one of the text boxes and enter (from left to right) the degrees, minutes and seconds values.
Page 181
Browser Remote: Controlling the Camera from a Network Device 10 [Overwrite Previous] button/[Overwrite] button While recording: Touch [Overwrite] to send the metadata entered in this screen to the camera, replacing any metadata that the clip being recorded might have. After recording a clip: Touch [Overwrite Previous] to send the metadata entered in this screen to the camera, replacing any metadata embedded in the last clip recorded.
Page 182
FTP File Transfer FTP File Transfer You can transfer MP4 or XF-AVC clips from the camera to another device connected to the network, using the FTP protocol. The following explanations assume that the FTP server is on, ready and correctly configured. Operating modes: Preparations Before you can transfer clips to a connected device, you need to configure the FTP server settings and other...
Page 183
FTP File Transfer Transferring Clips (FTP Transfer) After you record proxy clips to an SD card, you can transfer them to the FTP server. You can check the FTP- related settings on the status screens (A 195). Transferring a Single Clip 1 Connect the camera to the desired network (A 169).
Page 184
FTP File Transfer IMPORTANT • Observe the following precautions when transferring files. Failing to do so may interrupt the transfer and incomplete files may remain at the transfer destination. - Do not open the SD card slot cover. - Do not remove the power source or turn off the camera. •...
Page 185
Additional Information Menu Options Using the Menus For details about how to select an item, refer to (A 33). A menu item’s location within a menu is indicated by the page number icon (! ", etc.) in the left column. For details about each function, see the reference page or the explanation accompanying the menu entry.
Page 187
[Reel Number], [Clip Number] [001] to [999], [Change], [Reset], [Cancel] (A 61) [User Defined] User defined string up to 5 characters ([CANON]), [Change], [Reset], [Cancel] (A 61) [Scene], [Take] Scene description up to 16 characters / Take description up to 8 characters, [Change],...
Page 188
Menu Options Menu item Setting options and additional information [Country Code], [Organization], Identifiers up to 4 characters ([00__] default for [Organization] only), [Change], [Reset], [Cancel] [User Code] [Country Code]: This identifier is the country code defined by ISO-3166-1 and is to be entered starting from the left.
Page 189
Menu Options Menu item Setting options and additional information [HDMI OUT Channels] [CH1/CH2], [CH3/CH4] (A 157) Appears on page ! in mode. [¢ Monitoring Setup] menu Menu item Setting options and additional information [LCD LM-V1 Brightness] –99 to +99 (±0) (A 41) [LCD LM-V1 Contrast] –99 to +99 (±0)
Page 190
Menu Options Menu item Setting options and additional information % (l $) [OSD Output] [On], [Off] (A 156) [Custom Display 1] (A 57) [Light Metering], [On], [Off] [Custom Picture/HDR], [Focal Length], [ND Filter], [Focus Mode], [Key Lock], [White Balance], [AE Shift], [Exposure Bar], [Iris], [ISO/Gain], [Shutter], [Peaking], [Tele-converter], [EF-S Lens],...
Page 191
Menu Options Menu item Setting options and additional information [Peaking 2] (A 83) [Color] [White], [Red], [Yellow], [Blue] [Gain] [Off], 1 to 15 (15) [Frequency] 1 to 4 (1) [B&W during Peaking] [On], [Off] (A 83) k [Magn.: VF+VIDEO Output], [On], [Off] (A 83) l [Magn.: VIDEO Output],...
Page 192
Menu Options [7 Network Settings] menu Menu item Setting options and additional information [Connection Settings] [1: (NONE)], [2: (NONE)], [3: (NONE)], [4: (NONE)] (A 169) [Activate] [Off], [Browser Remote] (A 170) [Browser Remote Settings] (A 170) [Port No.] 1 to 65535 ([80]) [Camera ID] Camera identifier up to 8 characters ([C200]) [Users Settings]...
Page 193
Menu Options [B System Setup] menu Menu item Setting options and additional information [Reset] [All Settings], [Camera Settings] , [Assignable Buttons] These settings reset the following camera settings to default values/settings. [All Settings]: All the camera’s settings except for the hour meter. [Camera Settings]: White balance, iris, ISO speed, gain, shutter speed, [v Camera Setup] settings and custom picture settings.
Page 194
Appears on page # in mode. Appears on page $ in mode. Only when the LM-V1 LCD Monitor (supplied accessory for the C200; optional accessory for the C200B) is attached. [¥ My Menu] ( mode only) Menu item Setting options and additional information...
Page 195
Displaying the Status Screens Displaying the Status Screens You can use the status screens to check the camera’s various settings. You can also output the status screens to an external monitor. Operating modes: 1 Set an assignable button to [Status] in advance (A 125). 2 Press the assignable button to open the status screens.
Page 196
Displaying the Status Screens [/ Data 1/2] Status Screen mode only) 1 Custom picture file name (A 129) 7 Sharpness settings (level, horizontal detail 2 Master pedestal (A 134) frequency, horizontal/vertical detail balance, limit 3 Master black RGB levels (A 134) and select) (A 135) 4 Black gamma settings (level, range and point) 8 Coring settings (level, offset and curve) (A 135)
Page 197
Displaying the Status Screens [Camera 1/4] to [Camera 4/4] Status Screens mode only) 1 ISO speed/Gain (A 69) 5 Automatic exposure (AE) Selected mode, extended range, ISO increment AE shift (A 75), AE response (A 74) and gain increment 6 White balance (A 77) 2 Aperture (A 72) Shockless white balance, auto white balance Iris increment, aperture correction while zooming...
Page 198
Current functions of the assignable buttons (A 125) 1 On the camera’s body 4 On the optional EVF-V70 Electronic Viewfinder 2 On the camera grip 5 On the optional RC-V100 Remote Controller 3 On the LCD monitor Supplied accessory for the C200; optional accessory for the C200B.
Page 199
Displaying the Status Screens [Audio] Status Screens When you set an assignable button to [Audio Status], the status screens are the same except that you can press the joystick to open the [¡ ! Audio Setup] menu. mode mode 1 Audio source input, audio level adjustment mode [CFast]: Settings used for clips recorded on the and audio level indicator for each audio channel CFast card.
Page 200
Displaying the Status Screens [Media] Status Screen 1 SD card A 6 Used (recorded) space 2 SD card B 7 Available space 3 CFast card Only for the SD card: For each: 8 Number of remaining photos 4 Visual bar: Approximate used/available space 9 SD/UHS speed class 5 Total space NOTES...
Page 201
Displaying the Status Screens [Recording] Status Screen ( mode only) 1 Resolution and color sampling (A 65) 5 Interval length for interval recording mode 2 Bit rate (A 64) (A 117) 3 Relay recording (A 51) 6 MP4 Clip/Photo numbering (A 62) 4 Special recording mode (A 114) 7 Clip numbering (A 61) [Metadata] Status Screen (...
Page 202
Displaying the Status Screens [Battery/Hour Meter] Status Screen 1 Remaining recording time 4 Total operation time (A 194) 2 Remaining recording time indicator 5 Operation time since using [Reset Hour Meter] 3 Battery life indicator (A 194)
Page 203
Displaying the Status Screens [Network 1/5] to [Network 3/5] Status Screens* * In mode, [Network 1/6] to [Network 3/6]. Connection settings of the current network connection (A 161) 1 Network configuration name (A 169) 4 Authentication and encryption method 2 Connection type 5 WEP index key 3 SSID (network name) 6 Wi-Fi frequency band and channel...
Page 204
Displaying the Status Screens [Network 4/5] and [Network 5/5] Status Screens ( mode only) Settings for Browser Remote (A 170) 1 Camera ID 4 User setting (A 170), user name and password 2 Port number settings 3 Camera’s URL [Network 4/6] to [Network 6/6] Status Screens ( mode only) FTP server settings (A 182) 1 FTP server (host) name...
Page 205
Displaying the Status Screens [GPS Information Display] Status Screen ( mode only) 1 Latitude 4 UTC (coordinated universal time) date and time 2 Longitude 5 Satellite signal strength 3 Elevation Recording GPS Information (Geotagging) For details refer to (A 111).
Page 206
Troubleshooting Troubleshooting If you have a problem with your camera, refer to this section. Consult your dealer or a Canon Service Center if the problem persists. Power source The camera will not turn on or it turns off by itself.
Page 207
- The camera may become hot after using it continuously for long periods of time; this is not a malfunction. If the camera becomes unusually hot or it becomes hot after using it only for a short while, it may indicate a problem with the camera. Consult a Canon Service Center. Playback Cannot delete a clip.
Page 208
- The cooling fan may not be working properly. The camera will automatically turn off in approximately 10 minutes. Consult a Canon Service Center. appears on the screen. - The camera and lens cannot communicate normally. Clean the lens’s contacts and reattach the lens.
Page 209
Troubleshooting Sound is distorted or is recorded at lower levels. - When recording near loud sounds (such as fireworks, shows or concerts), sound may become distorted or it may not be recorded at the actual levels. Activate the microphone attenuator (A 103), or adjust the audio recording level manually.
Page 210
- The device, operating system or Web browser used may not be supported. For the latest information about supported systems, visit your local Canon Web site. - Enable JavaScript and cookies in your Web browser’s settings. For details, refer to the help modules or online documentation of the Web browser used.
Page 211
- This may be due to using a battery pack not recommended by Canon for use with this camera. - If you are using a battery pack recommended by Canon for use with this camera, there may be a problem with the battery pack or camera.
Page 212
- The primary recording format is set to RAW and [Gamma] in the custom picture file is set to an option other than [Canon Log] or [Canon Log 3]. Under such conditions, there will be more noise on video recorded with proxy recording clips on the SD card and on video output from the SDI terminal.
Page 213
- The file control information is corrupted or there was an encoder error. Turn the camera off and then on again. Then, remove the recording media being used and reinsert it. Alternatively, replace the CFast card. If this does not solve the problem, consult a Canon Service Center. SD Card ASD Card B / SD Card BSD Card A Switched - This message appears when you use the SLOT SELECT button to switch the SD card slot in use or recording continued from one SD card to the other.
Page 214
Network is not working correctly - There’s a hardware problem with the camera’s network related circuitry. Try turning the camera off and the on again. If the problem persists, consult a Canon Service Center. No access points found - The camera searched for active Wi-Fi networks (access points) in the area but none were found. Make sure the access point is working correctly and try connecting again.
Page 215
Troubleshooting Unable to connect - Could not connect to the access point or network device selected. - Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless signal. Try using the camera in a location farther away from such appliances. Unable to connect to FTP server.
Page 216
Handling Precautions and Safety Instructions Handling Precautions and Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING Denotes the risk of serious injury or death.
Page 217
If any of the above should get into the camera it may damage the camera and/or the lens. Consult a Canon Service Center as soon as possible. • Be careful to avoid dust and dirt particles accumulating on the lens or entering the camera. When you finish using the camera, make sure to attach the body cap to the lens mount and the lens cap and dust cap to the lens.
Page 218
Handling Precautions and Safety Instructions Battery Pack DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode). • Do not expose the battery pack to temperature higher than 60 °C (140 °F). Do not leave it near a heater or inside a car in hot weather.
Page 219
Recording Media • We recommend backing up the recordings on the recording media onto your computer. Data may be corrupted or lost due to defects or exposure to static electricity. Canon shall not be liable for lost or corrupted data.
Page 220
You can use the AC adapter to operate the camera and the battery charger to charge battery packs in any country/region with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug adapters for overseas use.
Page 221
Optional Accessories Optional Accessories The following optional accessories are compatible with this camera. The availability differs from area to area. CG-A20 Battery Charger BP-A30, BP-A60 CA-A10 AC Adapter CG-A10 Battery Charger and CA-CP200B Battery Pack Compact Power Adapter LM-V1 LCD Monitor LA-V1 LCD GR-V1 Camera Grip HDU-2 Handle Unit...
Page 222
Optional Accessories For our customers in the USA: Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camera by calling: 1-800-828-4040, Canon U.S.A. Information Center. Use of genuine Canon accessories is recommended.
Page 223
Video format: Cinema RAW Light Audio format: Linear PCM, 16 or 24 bit, 48 kHz, 4 channels File format: CRM (Canon RAW Movie; Canon proprietary file format) Video compression: MPEG-4 AVC/H.264 Audio format: MPEG-2 AAC-LC, 16 bit, 48 kHz, 2 channels...
Page 224
1.09 cm (0.43 in.), approx. 1,555,000 dots. • Lens Mount Canon EF mount compatible with Canon EF lenses (including EF-S lenses and EF Cinema lenses) Lens multiplication factor for 35mm equivalent focal length (approximate): When the resolution is 4096x2160, 2048x1080: 1.460 When the resolution is 3840x2160, 1920x1080: 1.534...
Page 225
• VIDEO Terminal Proprietary connector for the LM-V1 LCD Monitor or optional EVF-V70 Electronic Viewfinder; output only • Camera Grip Connection Terminal Proprietary connector for the camera grip unit connection plug Supplied accessory for the C200; optional accessory for the C200B.
Page 226
Specifications Power/Others • Power Supply (rated) 14.4 V DC (battery pack), 16.7 V DC (DC IN) • Power Consumption k with the SDI terminal, LCD screen and viewfinder active 19.3 W (recording at 59.94P; MP4/XF-AVC: 3840x2160, RAW: 4096x2160) 18.5 W (recording at 50.00P; MP4/XF-AVC: 3840x2160, RAW: 4096x2160) l with the SDI terminal active 17.5 W (recording at 59.94P;...
Page 227
Specifications k Modular Units LM-V1 LCD Monitor Includes the LCD panel (touch panel). • LCD Screen: 10.1 cm (4.0 in.) color LCD, 16:9 aspect ratio, approx. 1,230,000 dots, 100% coverage, capacitive touch screen operation • VIDEO Terminal Proprietary connector for connection to the camera; input only •...
Page 228
Specifications CG-A20 Battery Charger • Rated Input: 24 V DC, 1.8 A • Rated Output: 16.7 V DC, 1.5 A • Operating Temperature: 0 – 40 °C (32 – 104 °F) • Dimensions (W x H x D): 100 x 24 x 100 mm (3.9 x 0.9 x 3.9 in.) •...
Page 229
Following is a list of lenses compatible with this camera and the various functions that can be used depending on the lens. Depending on the lens’s purchase date, you may need to update the lens’s firmware to use these functions. For details, consult a Canon Service Center. Iris control from the camera...
Page 230
Reference Tables Reference Tables Approximate Recording Time on Recording Media Primary clips (CFast card; RAW clips) Bit rate → 1 Gbps CFast card capacity ↓ 64 GB 5 min. 128 GB 15 min. 256 GB 30 min. Primary/Proxy clips (SD card)* Format→...
Page 234
B. If the Products are defective as a result of leaking batteries, sand, dirt or water damage; C. If defects or damages are caused by the use of parts or supplies (other than those sold by Canon USA) that cause damage to the Products or that cause abnormally frequent service calls or service problems;...
Page 235
B. If the Products are defective as a result of leaking batteries, sand, dirt or water damage; C. If defects or damages are caused by the use of parts or supplies (other than those sold by Canon Canada) that cause damage to the Products or that cause abnormally frequent service calls or service problems;...
Page 236
Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon Europa N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands http://www.canon-europe.com USA http://pro.usa.canon.com UNITED KINGDOM CANON U.S.A., INC. Canon UK Ltd http://pro.usa.canon.com/support Unit 160, Centennial Park, Centennial Avenue, (855) CINE-EOS (855-246-3367)