Unlatching The Seat - Toro 75969TE Operator's Manual

1. Triangles light up when the interlock components are in the
correct position
Testing the Safety-Interlock
System
Service Interval: Before each use or daily
Test the safety-interlock system before you use the
machine each time. If the safety system does not
operate as described below, have an Authorized
Service Dealer repair the safety system immediately.
1. Sitting on the seat, engage the parking brake
and move the blade-control switch (PTO) to the
O position. Try starting the engine; the engine
N
should not start.
2. Sitting on the seat, engage the parking brake
and move the blade-control switch (PTO) to the
O position. Move either motion-control lever
FF
(out of the N
EUTRAL
the engine; the engine should not start. Repeat
for the other control lever.
3. Sitting on the seat, engage the parking brake,
move the blade-control switch (PTO) to the O
position, and move the motion-control levers
to the N -
EUTRAL LOCK
engine. While the engine is running, disengage
the parking brake, engage the blade-control
switch (PTO), and rise slightly from the seat; the
engine should shut off.
4. Sitting on the seat, engage the parking brake,
move the blade-control switch (PTO) to the O
position, and move the motion-control levers
to the N -
EUTRAL LOCK
engine. While the engine is running, center
either motion control and move (forward or
reverse); the engine should shut off. Repeat for
other motion control.
5. Sitting on the seat, disengage the parking brake,
move the blade-control switch (PTO) to the O
position, and move the motion-control levers
Figure 11
- position). Try starting
LOCK
position. Now start the
position. Now start the
to the N
EUTRAL
engine; the engine should not start.

Unlatching the Seat

To unlatch the seat, push the seat latch forward
(Figure 12).
g009181
FF
FF
FF
19
- position. Try starting the
LOCK
Figure 12
g204507