Adjusting the Anti-Scalp
Rollers
Whenever you change the height-of-cut, it is
recommended to adjust the height of the anti-scalp
rollers.
1.
Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Adjust the anti-scalp rollers as shown in
30,
Figure
31, and
Figure 30
1. Anti-scalp roller
2. Spacer
3. Bushing
Figure 31
1. Anti-scalp roller
2. Bushing
-
EUTRAL
LOCK
Figure
Figure
32.
4. Flange nut
5. Bolt
3. Flange nut
4. Bolt
1. Anti-scalp roller
2. Spacer
3. Bushing
g000942
g000943
29
Figure 32
4. Flange nut
5. Bolt
g000944