Table of Contents
Advertisement
7.2
Power Supply
Refer to figure
Figure 7-2
platform.
Display power
PFC
7.2.1
Power Supply Unit
All power supplies for TVs that are using a LED back lit LCD
panel are under repair policy. When defective, first check the
main fuse of the power board. Always replace a defective fuse
with one with the correct specifications! This part is available in
the regular market.
Consult the Philips Service web portal for the order codes of the
boards.
Important delta's with the 4000 series platform are:
•
New power architecture for LED backlight (PSL, PSLS,
PSDL)
•
"Boost"-signal is now a PWM-signal + continuous variable.
The used control signals are:
•
Stand-by
•
Inverter "on/off"
•
DIM (PWM) (not for PSDL)
•
Boost (PWM except for IPB)
The output voltages to the chassis are:
•
+3.3 V-STANDBY (Stand-by mode only)
•
+12 V (on-mode)
•
+V
(+24 V) (audio power) (on-mode)
snd
•
+24 V (bolt-on power) (on-mode)
•
Output to the display; in case of
- IPB: High voltage to the LCD panel
- PSL and PSLS (LED-driver outputs)
- PSDL (high frequent) AC-current.
for the power architecture of this
Ac-input + Mains filter
Figure 7-2 Power Architecture 4000 series
Circuit Descriptions
Platform power
BL-ON/OFF
DIM
12V
24V
5V
Low stby
power
AC IN
7.2.2
Diversity
The diversity in power supply units is mainly determined by the
diversity in displays.
The following displays can be distinguished:
•
CCFL/EEFL backlight: power board is conventional IPB
•
LED backlight:
- side-view LED without scanning: PSL power board
- side-view LED with scanning: PSLS power board
- direct-view LED without 2D-dimming: PSL power board
- direct-view LED with 2D-dimming: PSDL power board.
PSL stands for Power Supply with integrated LED-drivers.
PSLS stands for a Power Supply with integrated LED-drivers
with added Scanning functionality (added microcontroller).
PSDL stands for a Power Supply for Direct-view LED backlight
with 2D-dimming.
7.2.3
Connector overview
Table 7-1 Connector overview
no.
Descr.
Pin
1
2
3
back to
div. table
TPM9.2L LA
7.
AMP
24V
Platform
MTK5366
CN7001
/CN700
1 power- PCB
Connector
32PFLxxx7
42PFLxxx7
CN8101
CN9302
CN8503
to panel
to SSB
to panel
CN8101
CN9302
CN8503
VLED
P_OK
LED-11
n.c.
+5.2V
LED-16
LED3
+5.2V
LED-12
EN 27
LVDS
12V
19240_202_120224.eps
120224
CN902
to SSB
CN902
P_OK
+5.2V
+5.2V
2012-Mar-30
Advertisement
Table of Contents
