Table of Contents
Advertisement
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching them when this
indicator is lit.
Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Switching the hob on and off
The hob is turned on and off using the main switch.
To turn on: press the
symbol. The indicator above the main
%
switch lights up. The hob is ready for use.
To turn off: press the
symbol until the indicator above the
%
main switch disappears. All hotplates are turned off. The
residual heat indicator stays lit until the hotplates have cooled
off.
Note: The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.
Setting the hotplate
Select the required power level using symbols from 1 to 9 or
with the + and - symbols.
+ symbol = power level 9
- symbol = power level 4
Power level 1 = minimum power
Power level 9 = maximum power
Each power level has an intermediate setting. This is shown by
the .5 indicator (e.g. 1.5 ).
Cooking guidelines table
The table below contains some examples.
Cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
Power levels affect cooking results.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
Heating and keeping warm
Stew (e.g., lentils)
Milk**
Sausages heated in water**
* Uncovered cooking
** Uncovered
Although the hob is turned off, the
while the hotplate is hot.
If the pan is removed before the hotplate is turned off the
indicator and selected power setting will flash alternately.
Selecting the power level
The hob must be switched on.
Press the
symbol of the required hotplate. If you press
‰
1.
the
symbol, instructions on how to select the power level will
°
appear on the display.
Then select the required power level using symbols 1 to 9 or
2.
with the + and - symbols.
To change the power level: select the hotplate and press
3.
symbols 1 to 9 or use the + and - symbols.
When the
sensor is pressed, the length of time that the
°
hotplate has been switched on will appear.
Switch off the hotplate
Select the hotplate. Next press the power level symbol 0 or
press the + or - symbols until reaching 0.0.
Notes
If no pan has been placed on the induction hotplate, the
■
selected power level flashes. After a certain time has
elapsed, the hotplate switches off.
If the cooking zone is selected, an alert will appear on the
■
display. After a certain time has elapsed, the hotplate
switches off.
When heating purées, creams and thick sauces, stir
occasionally.
Use power level 9 to begin cooking.
Power level
1-1.5
1-1.5
1-2
1.5-2.5
3-4
q
H/
p
h indicator will remain lit
H/
q
Cooking time
(minutes)
-
-
-
-
-
h
p
7
Advertisement
Table of Contents
