Sharp KH-3I25NT0K-EU User Manual page 55

Control of the Touch Control Unit
1 2 3 4 5
7 8 9
1- Smart pause
2- Key lock
3- Key lock indicator
4- Heater display
5- Timer function cooking zone indicators
6- Timer display
7- Decrease heat setting/timer
8- Heater indicator
9- Increase heat setting/timer
10- Timer selection
11- Boost
12- On/Off
Use the induction cooking zones with
suitable cookware.
After mains voltage is applied, all displays
are illuminated briefly. After this, the hob is
in stand-by mode ready for operation.
The hob is controlled by the pressing the
appropriate electronic button. Each button
press is followed by a buzzer sound.
Switching the appliance on
Switch the hob on by touching ON/OFF
button . All heater displays show a
static ´0` and the bottom right dots blink.
(If a cooking-zone is not selected within 20
seconds, the hob will automatically turn off).
6
10 11 12
Switching the appliance off
Switch the hob off at any time by touching
.
The ON/OFF button
in the switch off function.
Switching the cooking-zones on
Touch the heater selection button that
corresponds to the heater you wish to
cook on. A static dot will be shown on the
selected heater display and the blinking
dots on all other heater displays will no
longer illuminate.
Select the temperature setting by using the
increase heat setting button
heat setting button
now ready to cook on. For faster boil times,
select the desired cooking level and then
touch the P button to activate the Boost
function.
Switching the cooking-zones off
Select the element you want to switch off by
pressing the heater selection button. Using
the button, turn the temperature down to
´0`. (Also, pressing the
simultaneously turns the temperature to
´0`).
If the cooking zone is hot, ´H` will be
displayed instead of ´0`.
Switching all cooking-zones off
To turn all the cooking zones off at once,
press the
In the stand-by mode, an ´H` appears on all
cooking zones which are hot.
Residual heat indicator
The residual heat indicator indicates that
the glass ceramic area has a temperature
that is dangerous to touch.
After switching off the cooking zone, the
respective display shows ´H` until the
corresponding cooking zone temperature is
at a safe level.
EN - 15
always has priority
or decrease
. The element is
and
button
buttons