Cable Installation - NEC NE3108-005 User Manual

7. Cable installation

Attach the Cable
1. Remove the dust cover from this product.
2. Connect the network cable.
Important
Detach the Cable
1. Remove the cable.
Pull the cable with pressing down the latch of the cable.
Please press down a cable latch portion not to get stuck in the edge of the
n
server chassis, and push in firmly until heard clicking sound and a cable are
fixed.
Avoid direct look into the laser beam.
The "NE3108-005 Optical module for 10GBASE SR" is classified as a Class 1 Laser
Product. A class 1 laser will not be harmful to the human body. However, do not look
directly into the LAN port during operation. Keep any vacant LC connector covered
with a dust cover when you do not use it or you transport it.
n Secure the removed the dust cover.
Important
n Check that the contact portion of a connector
is not dirty.
Check
CAUTION
n Attach the dust cover to this product.
Important
- 19 -