Chapter 4: Configuring Device Settings - Canon imageRUNNER ADVANCE C5560 Configuration And Installation Manual

Chapter 4: Configuring Device Settings

During setup, the imageRUNNER ADVANCE C5560 should be unboxed, powered
up, FedEx Office approved engine firmware version 64.55 verified, approved FedEx
Office settings configured, and all items and accessories confirmed to be on hand prior
to delivery to the FedEx Office location.
Deploying the Virtual Kitting Tool package
Note: Filenames in screenshots may differ from what is displayed on the device. Screenshots apply to all
FedEx Office devices with an imagePASS-P1. The same VKT package is used for C5540 and C5560
devices at FedEx Office with an imagePASS–P1 attached.
1. Download the file
FedEx Office Major Account section of Canon U.S.A.'s e-Support website.
2. Unzip the contents to the root of a USB drive ensuring [aca] and [quickInstall] are in
the top level directory of the drive. Please ensure the drive contains no other
engine firmware. This USB drive can be re-used for other imageRUNNER
ADVANCE C5560 FedEx Office deployments without having to reload the drive.
3. Plug-in the USB drive prepared in step 2 into the engine.
4. Press [Settings / Registration]  [Log In]
5. Enter Password (Default : 7654321), click "Login In"
9
imageRUNNER ADVANCE C5560 with imagePASS-P1 Full Service Configuration and Installation Guide
[FXO_iAC5500v64P1_VKT_Package_03072022.zip] from the