Advertisement
FOR
A COMPLETE
DESCRIPTION
OF THE
OPERATION
OF THIS
UNIT,
PLEASE
REFER
TO THE
OPERATION
MANUAL.
NAMES OF PARTS
ap ia
c a
4
<_—
hen
a!
2625 PHOTO: GF-4545H
Figure 2—1
Figure 2—2
1. Built-in microphone (Left channel)
15. Build-in microphone (Right channel)
2. FM stereo indicator
16. Telescopic rod antenna
3. Recording/Battery condition indicator
17. External microphone jack (Left channel)
4. Volume control
18. External microphone jack (Right channel)
5. Tone control
19. Record/Playback (DIN) socket
6. Balance control
20. Headphones jack
7. Stop/Eject button
21. Monitor on/off switch
8. Play button
22. Beat cancel switch
9. Fast forward button
23. AC input socket
10. Rewind button
24. External speaker jack (Left channel)
11.
Record button
25. External speaker jack (Right channel)
12. Function selector switch
26. Voltage selector switch (GF-4545H only)
13. Band selector switch
2/7, Battery compartment lid
14. Tuning control
Note:
Prior to disassembly,
never forget to remove
the AC supply
cord from a wall outlet.
A. FRONT
CABINET
REMOVAL
(Refer to Figures 2-3 and
2-4)
1. Remove
the
battery
compartment
lid and
take out six
batteries.
2. Remove
six screws
(A) retaining
the back
cabinet
and
lightly open the front cabinet.
3. Remove two sockets
from the main P.W. Board.
4. Then the front cabinet can be removed.
B. MECHANISM
BLOCK
REMOVAL
(Refer to Figure 2-4)
Figure 2—3
1. Unsolder
the lead wires
connected
to the earth terminal
(TP5) ©).
2. Remove
four tips, two screws, the sockets and the nylon
band
;
3. Then the mechanism block can be removed.
. MAIN
P.W. BOARD
REMOVAL
(Refer to Figure 2-4)
. Remove three control knobs and tuning knob
. Remove six screws and a tip
. Then the main P.W. Board can be removed.
WN
-Oo
Figure 2—4
Advertisement
