Creating Recovery Media - Toshiba NB305-N410 User Manual

Creating Recovery Media

This section describes how to create Recovery Media.
■
Be sure to connect the AC adaptor when you create Recovery Media.
■
Be sure to close all other software programs except the Recovery
Media Creator.
■
Do not run software such as screen savers which can put a heavy load
on the CPU.
■
Operate the computer at full power.
■
Do not use power-saving features.
■
Do not write to the media when the anti-virus software is running. Wait
for it to finish, then disable virus detection programs including any
software that checks files automatically in the background.
■
Do not use utilities, including those intended to enhance hard disk
drive access speed. They may cause unstable operation and damage
data.
■
Do not shut down/log off or Sleep/Hibernate while writing or rewriting
the disc.
■
Set the computer on a level surface and avoid places subjected to
vibrations such as airplanes, trains, or cars.
■
Do not use on unstable tables or other any other unstable surfaces.
■
You can use DVD media when you connect the external ODD.
A recovery image of the software on your computer is stored on the hard
disk drive, and can be copied to either DVD or USB Flash Memory by using
the following steps:
1. Select either blank DVD or USB Flash Memory.
2. The application will allow you to choose from a variety of different media
onto which the recovery image can be copied including DVD-R, DVD-R
DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW and USB Flash Memory.
■
Please note that some of the above media may not be compatible with
the optical disc drive installed into your computer. You should therefore
verify the optical disc drive supports the blank media you have chosen
before proceeding.
■
USB Flash Memory will be formatted and all the data in the USB Flash
Memory will be lost when proceeding.
3. Turn on your computer and allow it to load the Windows
system from the hard disk drive as normal.
4. Insert the media.
■
■
5. Double click the Recovery Media Creator icon on the Windows
desktop, or select the application from Start Menu.
6. After Recovery Media Creator starts, select the type of media and the
title you wish to copy, and then click the Create button.
User's Manual
Insert the first blank DVD into the optical disc drive tray, or
Insert the blank USB Flash Memory into one available USB port.
Getting Started
®
7 operating
®
7
3-12