Kenwood 103AR Instruction Manual page 10

: Keys or controls to be used in this operation
A, B OFF
Sound is not output from the speakers. Use this setting for listening
through headphones, etc
A ON
Sound is output from the speakers connected to the SPEAKERS A
terminals on the rear panel
B ON
Sound is output from the speakers connected to the SPEAKERS B
terminals on the rear panel
A, B ON
Sound is output from the speakers connected to the SPEAKERS A and
B terminals on the rear panel.
The input sources are switched in the following order
r*-
)
TUNER (frequency display)
O' lf"< A ' ~l
2 i fiumu
r Tt
The selected source
is displayed.
3
4' i' i :
'5 7 flf
nr
SPEAKERS
DD ~
l_
Ti
±i
• If a KENWOOD MD recorder connected through the system
remote control cord in the 1SL16! mode, it is necessary to
change the TAPE input to MD input using the following proce¬
dure
! Select the input name to be changed.
2
Press and hold the AUTO/MANUAL key for more than 2
seconds.