Totalising Function; Tare Function/Measuring In A Container; Measuring Liquids; Hold Function (Hold) - Silvercrest 352775 2010 Operating Instructions Manual

Totalising function

You can add individual measurements (max . 300 g
per measurement) together .
♦ Press the ON/TARE 4 button and carry out the
first measurement .
♦ Press the
weight of the material on the scale appear on
the display 2 .
♦ Remove the material from the spoon 1 and
add the next portion of material to be weighed .
The weight of the new material is now added to
the previous weight on the display 2 and the
total weight is shown .
♦ You can repeat this procedure until you have
reached 3000 g in total weight . If 3000 g is
exceeded, the display 2 shows "
NOTE
► You cannot use the TARE function while you
are adding weights!

TARE function/measuring in a container

♦ If you want to weigh food in another container,
place the container in the spoon 1 first .
♦ Then press the ON/TARE button 4 to reset the
display to zero .
♦ When you add the food to the container, only
the weight of the food itself will be displayed .
If you take the container with the food off the
spoon 1, a negative value will be displayed .
♦ Now press the ON/TARE button 4 again to
return to the normal weighing mode .

Measuring liquids

The scale in the spoon 1 can be used for measuring
liquids (15–45 ml or 1–3 tablespoons) .
However, due to optical displacement, differences
of up to 15% can occur .

Hold function (HOLD)

If you press the HOLD button 6 while a weight is
being displayed, the weight display will be retained
even if you remove the contents from the spoon 1 .
If you then press the HOLD button 6 again, you
will deactivate the hold function and the current
weight will be displayed again .
SDL 300 C2
/UNIT button 3 button . "
∑
" and the
∑
" .
GB │ CY │
7 ■