Yamaha EMR-1 User Manual page 12

Digital drummer
Hide thumbs Also See for EMR-1:
Table of Contents

Advertisement

KM Recording the Rhythm Sequence
1.
. Press the LARGE
button to
Press the PLAY button while holding the REC button to enter the RECORD
mode.
''CLr'' will appear on the Measure/Tempo
display for about a
second, indicating that any previous recording has been ''cleared."' The display
then switches to **. 0" indicating that the EMR-1 is ready to record the first
measure.
. Select the desired rhythm—in this case POPS 1. Press the SLOW and FAST
buttons simultaneously to set the optimum tempo (94) for the selected
rhythm (POPS 1). Press the INTRO/ENDING
button (the second (green)
Beat Display segment will light).
. Now, when you press the REC button all the settings you made in step 2,
above, will actually be recorded. The Measure/Tempo display will show
"2"? to indicate that 2 measures have been recorded (you just recorded a
POPS 1 INTRO, which is 2 measures long). The second (green) segment in
the Beat Display will go out indicating that INTRO/ENDING is no longer
selected.
. Press the REC button once again to record one measure of the standard
POPS 1 rhythm. ''1'' will be shown on the Measure/Tempo display, indicating
that one measure has been recorded since the last data change (in this case,
the end of the INTRO). After about a second, the display will then show
the total number of measures recorded—**3" at this point.
. Press the FILL IN button. The third (green) segment of the Beat Display
will light indicating that you are ready to record a FILL IN.
. Press the REC button to record the POPS 1 FILL IN. As you do this the
Measure/Tempo display will show ''1'' indicating that one measure has been
recorded since the last data change (FILL IN selected), then after about a
second it will display ''4''—the total number of measures recorded. Note
also that now that the FILL IN has been recorded, the third (green) Beat
Display LED has gone out.
select the LARGE
rhythm
a
section
for POPS
1, then
press the FAST button until
ul
a tempo
setting of 120 is
.
q
achieved.
. Press the REC
button twice to record two measures of LARGE
rhythm
section POPS
1 rhythm at a tempo of 120. The total number of measure
recorded is now 6.
. Press the SAMBA
1 rhythm selector. Press the SMALL
button to restore
the rhythm section size to normal.
11
oy >> a
RE
Paes

Advertisement

Table of Contents
loading

Table of Contents