Yamaha EMR-1 User Manual page 2

Thank you for purchasing a Yamaha EMR-1 Digital Drummer. The EMR-1 is a sophisticated but easy-to-use Digital
Drummer designed primarily for use with Yamaha Clavinova, PortaTone and PortaSound instruments, and which incor-
porates the very latest Yamaha technology. In order to obtain maximum performance, we urge you to read this User's
Guide thoroughly before using your EMR-1, and keep the manual in a safe place for later reference.
1. The Power SUpply sen 2
2. Description of Controls and Connectors
3. System Examples .........s.00erensasasanaranannananananan
4. Operation nn a
5. MIDI Control ..........s0sesoeesenananansanaranenaanasanananannonnenne
6. Troubleshooting nn 17
7. MIDI System Realtime Message Information . 17
8. MIDI System Exclusive Message Information 18
9. Specifications
Precautions ... READ THIS FIRST! .
To ensure safe, reliable operation of your EMR-1, please read the following precautions carefully.
eee Chossing a Location for your EMR-1
Avoid placing the EMR-1 in the following locations to
prevent possible damage:
è Locations exposed to direct sunlight or near sources of
heat.
è Excessively cold locations.
e Locations exposed to high humidity or excessive dust.
e Locations subject to vibration or shock.
e Locations next to transformers or motors (e.g. refrig-
erators or similar heavy equipment), fluorescent lighting
fixtures, television receivers, etc. This type of equipment
emits electrical noise which may cause a buzzing or hum-
ming sound from the EMR-1.
A eee Never Apply Unnecessary Force
The EMR-1 is a precision electronic device, and can be
damaged if dropped or subject to strong physical shocks.
Handle it with care.
0) eee The Power Supply
Use ONLY the specified power supply for the EMR-1,
and always turn the power switch OFF and disconnect the
power adaptor from the AC wall outlet after use.
Cautions:
Do not place the AC power adaptor on top of the EMR-1.
Clean the outer case with a soft, dry cloth. Never use
solvents such as benzine or thinner, as these can damage
the finish.
:
b i eee Connection with Other Devices
Before connecting the EMR-1 to a keyboard or other
electronic device, make sure the power to both devices is
turned OFF. Also make sure the power is OFF when
connecting or disconnecting the optional FC-5 footswitch.