Pioneer VSX-D6025 Operating Instructions Manual

Operating
Instructions
WD PHONEER srecreee arones necoves WSX-D7025
DEMO MODE
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how
to operate your model properly. After you have finished reading the
instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power
outlet may sometimes differ from that shown in the explanatory
drawings. However, the method of connecting and operating the unit
is the same.
WARNING: To PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel. Piease
write this serial number on your enclosed warranty card and keep it in
a secure area. This is for your security.
Note to CATV system installer
This reminder is provided to call the CATV systern installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
* The demonstration mode is activated by turning on the power:
switch while holding down the RETURN button (from power
standby condition). The demonstration will appear on the display.
© Press the POWER switch to cancel the demonstration.
© Activating the demonstration mode causes memory contents to
return to their original default condition except tuner.
AUDIO/VIDEO STEREO RECEIVER
V9SX-D6025
VSX-D7025
* Illustration shows model VSX-D702S.
[For Canadian model]
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
ATTENTION: pour PREVENIR LES CHOCS ELECTRIQUES NE
PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR
UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT,
SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN
LAISSER AUCUNE PARTIE A DECOUVERT.
RETURN function
This function returns the unit to a set of initial settings and ready
to broadcast tuner. This is helpful during troubleshooting or when
no sound is output. For details, refer to page 20.
@ PIONEER'
The Art of Entertainment