English POLISHER DCM849 Congratulations! EC-Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data Polisher DCM849 DCM849 Voltage...
English h ) Do not let familiarity gained from frequent use of contacts eyes, additionally seek medical help. Liquid tools allow you to become complacent and ignore ejected from the battery may cause irritation or burns. tool safety principles. A careless action can cause severe e ) Do not use a battery pack or tool that is damaged injury within a fraction of a second.
English chips and cracks, backing pad for cracks, tear or in turn causes the uncontrolled power tool to be forced in the excess wear, wire brush for loose or cracked wires. direction opposite of the accessory’s rotation at the point of If power tool or accessory is dropped, inspect for the binding.
English Ensure the switch is in the lock-off position when not • • Before using charger, read all instructions and cautionary in use and before connecting to the power source or markings on charger, battery pack, and product using battery pack. battery pack.
English Disconnect the charger from the outlet before The DCB118 charger is equipped with an internal fan designed • attempting any cleaning. This will reduce the risk of to cool the battery pack. The fan will turn on automatically when electric shock.
English 40 ˚C (104 ˚F) (such as outside sheds or metal buildings In most instances, shipping a D WALT battery pack will be in summer). excepted from being classified as a fully regulated Class 9 Hazardous Material. In general, only shipments containing a •...
English Labels on Charger and Battery Pack 1 180 mm hook and loop backing pad 1 Li-Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models) In addition to the pictographs used in this manual, the labels on the charger and the battery pack may show the following 2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models) pictographs:...
English Auxiliary Handle (Fig. A) surfaces in professional applications. Common examples of use include but are not limited to: auto/marine/RV/motorcycle WARNING: Before using the tool, check that the handle is detailing and finish correction, boat construction and repair, and tightened securely. metal or concrete finishing. An auxiliary handle 7 ...
English Speed Control Wheel (Fig. A) 2. Line up the centre hole on the hook and loop pad with 20 the centring tube and attach the pad to the hook and The maximum speed of your tool can be changed by rotating loop backing pad 21 ...
English Protecting the Environment charge on the metal portions of this tool resulting in a static shock when touched. Separate collection. Products and batteries marked MAINTENANCE with this symbol must not be disposed of with normal household waste. Your power tool has been designed to operate over a long Products and batteries contain materials that can period of time with a minimum of maintenance.
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)