Setting Auto Limits
Use the Auto Limits menu to
quickly set alarm ranges for 'MV',
'TV', and 'EtCO
' during mechanical
2
ventilation.
1. Select the Auto Limits key.
The menu shows the current
measured values and the
proposed low and high alarm
limits. Check the proposed
parameters.
2. Select Confirm to use the
proposed low and high alarm
limits.
3. Select Cancel to leave the alarm
limits unchanged.
4. Select Case Default Limits to
set the alarm limits to the case
default limits.
Viewing Trends
Use the Trends menu to view
patient trends and set the time
scale.
1. Select the Trends key.
2. Select the desired view.
3. Select Scroll to move through
the current trend view.
4. Select Time Scale to select
the desired scale from the
dropdown menu.
5. Select Next Page to view
additional parameters.
6. Select Close to close the menu.
3
2
3
4
5
29
4
2
6
1
1