Table of Contents
Advertisement
Right
Left
Front
Catcher Bag
Chipper Chute
with Support Bracket
20-oz. Bottle
of Engine Oil
Figure I
Nozzle
Spark Plug
Wire
IMPORTANT: This unitis shipped without gasoline
or oil in the engine. After assembly, see
OPERATION sectionof this manual for proper fuel
and engine oil flU-up.
NOTE: To determine right and left hand sides of your
_1-- chipper-shredder vacuum, stand beh=indthe unit with
the engine farthest away fromyou.
Your chipper-shredder v acuumhas been completely
assembled at the factory,except for the nozzle, the
chipper chute with support bracket and the catcher bag.
These parts are shipped loose in the carton. A pair of
safety glasses and a 20-oz. bottle of engine oil are also
includedin the carton.
Removing From Carton
Cut the corners of the carton.
Remove all packing inserts.
Remove aUloose parts. See Figure 1.
Push down on handle to lift front of chipper-
shredder vacuum and roll unit out of the carton.
Make certain all parts and literature have been
removed before the carton is discarded.
Loose Parts
(See Figure 1.)
1.
Nozzle
2.
Chipper Chute with Support Bracket
3.
Catcher Bag
4.
Safety Glasses (Not Shown in Figure 1 )
5.
A 20-oz. Bottle of Engine Oil
Tools Required
t.
1/2" or adjustablewrenches
2.
7/16" or adjustablewrenches
3.
Funnel(Recommended)
4.
Pliers
......
;
,b
Disconnecting Spark Plug
(See Figure 2.)
Before proceedingwith assembly of your new
chipper-shreddervacuum unit, disconnectthe
spark plug wire from the spark plug on the
engine and move it away. This willprevent
accidental starting ofthe engine in any way.
Figure 2
5
Hide quick links:
Advertisement
Table of Contents
