Removing The Platform For The Stand; Wall-Mounting - Silvercrest TARGA Visionary LCD 24-9 Wide User Manual And Service Instructions

SilverCrest LCD 24-9 Wide

Removing the Platform for the Stand

If you ever have to transport the device you will have to remove the
platform for the stand again so you can pack it securely.
1. Place a cushion or a blanket on a sufficiently large table.
2. Place your SilverCrest LCD 24-9 Wide on the table so that the
stand platform slightly protrudes over the front table edge and
that the screen lies flat on the cushion.
3. Press the two plastic locks together (see the arrows) to unlock
the platform and slightly move the platform back and forth to
release it.
4. Pull the platform from the housing towards the front.

Wall-Mounting

You can mount your LCD 24-9 Wide to the wall by using a VESA
wall mount with a 100 x 100 mm receptacle. Please also read the
Safety Instructions for your VESA mounting kit (see the
documentation for your VESA wall mounting kit). To do so,
disassemble the base as follows:
1. Power the device off and unplug all cables and connectors. For
the following steps you will need a conventional Philips
screwdriver.
122