LG WK2116BST Owner's Manual page 56

MAINTENANCE
56
3
Remove the inner filter.
4
Open the outer filter by unfolding in the
direction of the arrow grasping the top edge of
the outer filter.
5
Clean the residual lint using vacuum cleaner or
washing under running water.
• Dry the filter completely if the filter is moist.
Failure to do so, odour may occur in the
appliance.
6
Close them, and reinsert the both lint filters.
CAUTION
• Do not load or remove any clothes when the lint
filter is not in a place. The clothes can drop into
the filter inlet and it may cause the appliance to
malfunction.
Wiping the Moisture Sensor
This device senses the moisture level of the clothes
during operation, which means it must be cleaned
regularly to remove any build-up of lime scale on
the surface of the sensor.
Wipe the sensors inside the drum.
CAUTION
• Do not wipe the moisture sensor with abrasive
materials. Always clean the sensor with a dry
rough acrylic sponge.
Using Drum Clean Feature
With time and use, the appliance may form
unpleasant odours that leave your clothes smelling
after drying. Using this cleaning function
periodically helps to reduce the unpleasant odours
from the appliance.
CAUTION
• Remove all of the clothes from the appliance.
1
Turn on the appliance.
2
Press the Drum Care button.
3
Hold the Start/Pause button.
• This function operates for about 3 hours.
4
Open the dryer's door to provide the appliance
with enough air circulation for exhausting any
remaining odours.