Sound Adjustment; Clock And Timer - Panasonic SC-HC57 Owner's Manual

Sound adjustment

The following sound effects can be added to the
audio output.
1
Press [SOUND] repeatedly to select the effect
and then press [OK].
2
Press [3, 4] to select the setting and then
press [OK].
Direct-Vocal "LEVEL 1", "LEVEL 2" or
Surround "OFF".
(D.SURROUND) ≥ The factory preset is "OFF".
Preset EQ "HEAVY" (heavy), "SOFT"
(PRESET EQ) (soft), "CLEAR" (clear),
"VOCAL" (vocal) or "FLAT"
(flat/off).
≥ The factory preset is "HEAVY".
Bass (BASS) or Adjust the level (j4 to i4).
Treble (TREBLE)
Dynamic Bass* "ON D.BASS" or
1
(D.BASS) "OFF D.BASS".
≥ The factory preset is
"ON D.BASS".
*1: [SC-HC37] This function can also be selected with the
[D.BASS] button on the unit.
≥ You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.

Clock and Timer

Setting the clock
This is a 12-hour clock.
1
Press [SETUP] repeatedly to select "CLOCK"
and then press [OK].
2
Press [3, 4] to set the time and then press
[OK].
≥ To display the clock, press [SETUP] repeatedly to select
"CLOCK" and then press [OK] once. The time is displayed for
10 seconds.
(During standby, press [iPod MENU, DISPLAY] once.)
≥ The clock is reset when there is a power failure or when the
AC power supply cord is removed.
≥ Reset the clock regularly to maintain accuracy.
Play timer
You can set the timer so this unit turns on at a
certain time every day.
Preparation
Set the clock ( left).
∫ Setting the timer
1
Press [SETUP] repeatedly to select
"TIMER ADJ" and then press [OK].
2
Press [3, 4] to set the starting time
("ON TIME") and then press [OK].
3
Press [3, 4] to set the finishing time
("OFF TIME") and then press [OK].
≥ To display the timer settings, press [SETUP] repeatedly to
select "TIMER ADJ" and then press [OK] once.
(During standby, press [iPod MENU, DISPLAY] twice.)
≥ The music source and volume will also be displayed if the
timer is turned on. ( below)
∫ Turn the timer on
1
Select the music source*
volume.
2
Press [SETUP] repeatedly to select
"TIMER SET" and then press [OK].
3
Press [3, 4] to select "SET" and then press
[OK].
≥ "F" is displayed.
4
Press [Í] to turn the unit off.
*1: "CD", "IPOD" and "FM" can be set as the music source.
≥ This unit can be used as normal after the timer is set,
however:
≥ Turn the unit to standby mode before the timer start time.
≥ Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
≥ To turn the timer off, select "OFF" in step 3.
≥ The unit will turn on at the preset time, with the volume
increasing gradually to the preset level.
Sleep timer
The sleep timer can turn the unit off after a set time.
1
Press [SETUP] repeatedly to select "SLEEP"
and then press [OK].
2
Press [3, 4] to set the time (in minutes) and
then press [OK].
"SLEEP 30" ,. "SLEEP 60" ,. "SLEEP 90" ,. "SLEEP 120"
^----------------------.
OFF (Cancel)
≥ The remaining time is indicated on the unit's display except
when other operations are performed.
≥ The play timer and sleep timer can be used together. The
sleep timer always has priority.
and set the desired
1
(----------------------J
RQT9633
11