Stopping Clearing Snow - Yamaha YS1070T Owner's Manual

1
1
2
1
3
2
1

Stopping clearing snow

1.
Release the drive clutch lever. The auger rotation
stops, and the Snowblower stops moving.
1. Drive clutch lever
2. Move the shift lever to the "N" (Neutral) position.
1. Shift lever
2. "N" (Neutral)
3.
Hold the drive clutch lever and pull back the auger
clutch lever to clear the snow on the auger and
impeller.
TIP
After clearing snow, hold the drive clutch lever and pull
back the auger clutch lever to clear the snow on the
auger and impeller. Leaving snow on the auger and
impeller could cause freeze and damage.
4.
Release the drive clutch lever. The auger clutch
2
lever automatically returns to its original position.
1. Drive clutch lever
2. Auger clutch lever
5. Move the throttle lever to the "SLOW
Turn the engine switch key to the "STOP
tion to stop the engine, and then turn the fuel cock
lever to the "STOP" position.
1. Throttle lever
2. "FAST (START)
3. "SLOW
"
"
Operation
" position.
" posi-
4-9