Kenwood GE-600 Instruction Manual page 5

Ak ant
Operating instructions
Mi To equalize the program source connected to
the amplifier
1. Set the POWER switch to ON. The indicator lights.
2. Set the INPUT switch to LINE.
3. Set the EQUALIZER EFFECT switch to ON. The in-
dicator lights.
KENWOOD srento cnarmc eauauzen ct-600
4. Play the program source connected to the amplifier.
5. Adjust the level controls (RIGHT/LEFT channel) to
compensate the sound quality.
LEFT
a |
° \—
eno
He sso 400He re Rie
POWER
'
i To equalize tape sound
1. Set the POWER switch to ON. The indicator lights.
2. Set the INPUT switch to TAPE.
3. Set the EQUALIZER EFFECT switch to ON. The in-
dicator lights.
KENWOCD _ srenco crapnic eauauzen cesoo
4. Set the tape deck to the playback mode.
5. Adjust the level controls (RIGHT/LEFT channel) to
compensate the sound quality.
M@To record amplifier's program source after
equalization
. Set the POWER switch to ON.
2. Press the INPUT LINE switch to on. The LINE in-
dicator will light.
3. Set the EQUALIZER REC switch to on. The equalizer
recording effect indicator (REC) will light.
4, Play the program source connected to the amplifier.
5. Use the equalizer rang selector (EQ RANGE) to select
the appropriate maximum equalization range.
=
KENWOOD sreaco casmuc ravauzin cé-600
6. Adjust the level controls (Right/Left channel) to com-
pensate the sound quality.
The equalized sound can be checked by the
EQUALIZER EFFECT switch to on or off.
7. Set the tape deck to the rec pause mode and adjust
the recording level.
8. Set the tape deck to the recording mode. Equalized
sound can be recorded.
LEFT.
Ge-600 5