Panasonic ERJ XG Series Quick Start Manual

Thick Film Chip Resistors
ERJ type
ERJ XG, 1G, 2G, 3G, 6G
ERJ 8G, 14, 12, 12Z, 1T
Features
● Small size and lightweight
● High reliability
: Metal glaze thick film resistive element and three layers of electrodes
● Compatible with placement machines
● Suitable for both reflow and flow soldering
● Reference standard
● AEC-Q200 compliant (except ERJXG, ERJ1GN)
● RoHS compliant
■ As for packaging methods, land pattern, soldering conditions and safety precautions,
please see data files.
Explanation of part numbers
Note : Please check the "Ratings" for the presence/absence of part numbers for combinations of the symbols below.
● ERJXGN, 1GN, 1GJ, 2GE, 3GE, 6GE,
1 2 3
E R J
Size, Power rating
Product code
Code inch Power rating
Thick film
chip resistors
XGN
01005
1GN
0201
1GJ
2GE 0402
3GE 0603
6GE 0805
8GE 1206
NRFND
14 1210
NRFND
12 1812
NRFND
12Z 2010
NRFND
1T 2512
NRFND
* Series XGN, 1GN, 1GJ and 2GE do not have value markings on the black side.
Please omit the letter "Y" from the part number for these series of parts.
The other part number factors will move up respectively.
* For the automotive application, please use ERJ1GJ as 0201 inch size from the new design.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
series
series
: Taping packaging available
: IEC 60115-8，JIS C 5201-8，JEITA RC-2134C
8GE, 14, 12, 12Z, 1T
4 5 6
3 G E
Marking
Code Marking
Value
0.031 W
Y marking on
black side
0.05 W
*Nil No marking
0.1 W
0.1 W
0.125 W
0.25 W
0.5 W
0.75 W
0.75 W
1 W
series，±5 %
7 8 9
Y J 1
Resistance tolerance Resistance value
Code Tolerance
J ±5 ％
The first two digits are
significant figures of
0 Jumper
resistance and the
third one denotes
number of zeros
following. Jumper is
expressed by R00.
(Ex.) 222 : 2.2 kΩ
4R7 : 4.7 Ω
(Oct. 2021) Products marked as "NRFND" are
not recommended for new design.
Target products : ERJ8G, 14, 12, 12Z, 1T series
Please refer to the recommended alternatives with
"Design Support Tool" ・
10 11 12
0 2 V
Packaging methods
Code Packaging
Pressed carrier taping
Y
W8P2, 20,000 pcs
Embossed carrier taping
U
W4P1, 40,000 pcs
Pressed carrier taping
C
2 mm pitch, 15,000 pcs
Punched carrier taping
X
2 mm pitch, 10,000 pcs
Punched carrier taping
V
4 mm pitch, 5,000 pcs
Embossed carrier taping
4 mm pitch, 5,000 pcs
U
Embossed carrier taping
4 mm pitch, 4,000 pcs
Not recommended for new design
Part No.
ERJXGN
ERJ1GN
ERJ1GJ
ERJ2GE
ERJ3GE
ERJ6GE
ERJ8GE
NRFND
ERJ14
NRFND
ERJ12
NRFND
ERJ12Z
NRFND
ERJ1T
NRFND
22-Dec-22