DIP6-pin type with low on-resistance and high insulation
8.8
6.4
1
2
3
TYPES
I/O isolation
Category
Load
voltage
voltage
40 V
60 V
100 V
200 V
1,500 Vrms
250 V
AC/DC
400 V
dual use
1,000 V
1,500 V
250 V
5,000 Vrms
400 V
(High insulation)
600 V
Note: The surface mount terminal shape indicator "A" and the packing style indicator "X" are not marked on the device.
(Ex. the label for product number AQV251AX is AQV251.)
*1.Indicate the peak AC and DC values.
*2.Tape and reel packing style X: picked from the 1/2/3-pin side. For part numbers with picked from the 4/5/6-pin side, change the "X" at the end to "Z" when ordering.
2022.01
industrial.panasonic.com/ac/e/
6.4
8.8
3.6
3.9
(Height includes standoff )
6
5
4
(Unit: mm)
Output rating*
1
Through hole
terminal
Load
current
Tube packing
style
500 mA
AQV251
400 mA
AQV252
350 mA
AQV255
250 mA
AQV257
200 mA
AQV253
150 mA
AQV254
30 mA
AQV259
20 mA
AQV258
200 mA
AQV253H
150 mA
AQV254H
130 mA
AQV256H
FEATURES
Wide variation of 40V, 60V, 100V, 200V, 250V, 400V,
600V, 1,000V and 1,500V load voltage
Low on-resistance of Typ. 0.6Ω (AQV251)
High I/O isolation voltage of 5,000 V available
TYPICAL APPLICATIONS
Measuring instruments
Data communication equipment
Telephone equipment
Automatic meter reading device
Note: Please contact our sales representative for automotive applications of PhotoMOS.
Page 1
AQV256HAX Note: The surface mount terminal shape indicator “A” and the packing style indicator “X” are not marked on the device. (Ex. the label for product number AQV251AX is AQV251.) *1.Indicate the peak AC and DC values. *2.Tape and reel packing style X: picked from the 1/2/3-pin side. For part numbers with picked from the 4/5/6-pin side, change the "X" at the end to "Z" when ordering.
Page 2
0.2 ms Typical 1.3 pF f = 1 MHz capacitance = 0 V Maximum 3 pF Initial I/O isolation Minimum 1,000 MΩ 500 V DC resistance Panasonic Corporation Electromechanical Control Business Division ー 2 ー ASCTB143E 202201 Panasonic Corporation 2022 industrial.panasonic.com/ac/e/...
Load (DC) (DC) Load *Terminal 3 cannot be used, since it is in the internal circuit of the device. Panasonic Corporation Electromechanical Control Business Division ー 6 ー ASCTB143E 202201 Panasonic Corporation 2022 industrial.panasonic.com/ac/e/...
Note: For the latest information on compliance with safety standards, please refer to our website. Please refer to "the latest product specifications" when designing your product. •Requests to customers: https://industrial.panasonic.com/ac/e/salespolicies/ Panasonic Corporation Electromechanical Control Business Division ー 7 ー ASCTB143E 202201 Panasonic Corporation 2022 industrial.panasonic.com/ac/e/...
(Use of low-voltage soldering irons is also recommended.) 4) Devices and equipment used in assembly should also be grounded. Panasonic Corporation Electromechanical Control Business Division ー 8 ー ASCTB65E 202201 Panasonic Corporation 2022...
Page 9
7) Please make sure the input voltage for E . is no higher than 5.5V. become the inductance and cause the spike voltage. Keep the (for CC Type) wire as short as possible. Panasonic Corporation Electromechanical Control Business Division ー 9 ー ASCTB65E 202201 Panasonic Corporation 2022 industrial.panasonic.com/ac/e/...
Page 10
Please check them under the actual production condition in detail. 5) Please apply coating when the device returns to a room temperature. Panasonic Corporation Electromechanical Control Business Division ー 10 ー ASCTB65E 202201 Panasonic Corporation 2022...
Condensation causes the failures such as insulation deterioration. Panasonic Corporation does not guarantee the failures caused by water condensation. The heat conduction by the equipment the PhotoMOS is mounted may accelerate the water condensation.
(2) When picked from 3/4-pin side: Part No. AQY*SZ, APV**21SZ ± ± ± dia. *Quality of material: Paper Note: “ * ” indicates characters of number or alphabet. Panasonic Corporation Electromechanical Control Business Division ー 12 ー ASCTB65E 202201 Panasonic Corporation 2022 industrial.panasonic.com/ac/e/...
Page 13
± ± *Quality of material: Paper (2) When picked from 4/5/6-pin side: Part No. AQV*AZ Note: “ * ” indicates characters of number or alphabet. Panasonic Corporation Electromechanical Control Business Division ー 13 ー ASCTB65E 202201 Panasonic Corporation 2022 industrial.panasonic.com/ac/e/...
Page 14
Observe correct orientation when mounting them on PC boards. (PD type) (SOP type) Stopper B Stopper A Stopper B (green) Stopper A (gray) (DIP type) (Power type) Stopper Stopper Stopper Panasonic Corporation Electromechanical Control Business Division ー 14 ー ASCTB65E 202201 Panasonic Corporation 2022 industrial.panasonic.com/ac/e/...
Page 15
AQZ207G Peak AC, DC 200 V Peak AC, DC 2 A 100 V DC 120, 240 V AC AQZ206G2 Peak AC, DC 600 V Peak AC, DC 1 A 200, 400 V DC Panasonic Corporation Electromechanical Control Business Division ー 15 ー ASCTB65E 202201 Panasonic Corporation 2022 industrial.panasonic.com/ac/e/...