Table of Contents
Advertisement
112
If it is necessary to update the D20E module firmware:
1.
Power up the D20E module.
2.
Connect the D20E module to the DAPserver Studio (running on a Windows PC) via the
LAN port.
IP address: 192.168.0.xxx
Windows PC
3.
Select Update from the Device menu tab.
Result: The Device Information window appears.
4.
Type in the IP Address of the D20E module.
5.
Type in the Username and Password login credentials (default: admin).
6.
Click OK.
Result: The Update window appears.
7.
Select the update to include:
–
Application update
–
Application - update OS. It is necessary to update the OS as well for a D20E
Ethernet I/O Module.
8.
Click OK.
Result: The Updating ... window appears, showing the progress of the firmware
download.
Result: The D20E module automatically restarts after a successful download, in order
for the new firmware to take effect.
9.
When the D20E module restart is complete, reconnect to the D20E module:
9.1.
Open the Device menu bar.
9.2.
Click Explore.
Result: Explorer opens.
10. Check that the firmware version and point status are all in a good state.
You cannot downgrade to an older firmware version.
GE INFORMATION
CHAPTER 10: MAINTAINING A D20E MODULE FIRMWARE
IP address: 192.168.0.xxx
Ethernet crossover cable
D20E ETHERNET I/O MODULE INSTRUCTION MANUAL
D20E Ethernet I/O module
Advertisement
Table of Contents
