Husqvarna Blastrac EBE 350 Operator's Manual page 28

9. Remove the V-belt mount plate.
10. Remove the blast motor mount plate and the blast
motor.
11. Remove the top liner cover.
28
12. Remove the top liner.
13. Remove the impeller. Refer to
wheel blades on page 21 .
14. Use a brass drift and a hammer to push down the
blast wheel blades (A).
A
B
CAUTION:
the blast wheel blades. There is a risk
that the blast wheel blades break.
15. Remove and discard the blast wheel blades (B).
CAUTION:
in the blast wheel, it is necessary to
replace all 6 blast wheel blades at the
same time.
To remove the blast
Push at the bottom of
To prevent unbalance
2111 - 001 - 21.07.2023