Advertisement
USER SERVICING INSTRUCTIONS
1.
Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on cord.
2.
Open fuse cover. Slide open fuse access cover on top of
attachment plug towards blades.
3. Remove fuse carefully. Insert the tip of your tool into fuse
slot (close with the terminal), then prize the fuse gradually
and slowly, but not overexert. If you feel tight, you can try it
at several times and prize the fuse little by little. When one
side of the fuse has been prized, then you can get the fuse
out entirely.
4. Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse.
5. Close fuse cover. Slide closed the fuse access cover on top
of attachment plug.
6.
Risk of fire. Do not replace attachment plug. Contains a
safety device (fuse) that should not be removed. Discard
product if the attachment plug is damaged.
MISTING NOZZLE MAINTENANCE
If the misting nozzles become clogged, unscrew them from the
fan grille and soak in vinegar or a lime scale remover until they
are clear of buildup. Use a non-metallic brush to scrub them if
necessary. If the nozzles remain obstructed, contact customer
service for replacement.
Warning: never try to clear the nozzles with pins or other sharp
objects as this can cause damage to the nozzles, affecting their
efficiency.
If the misting hose valve becomes clogged, unscrew the head of
the valve and flush it with running water to clear debris. Make
sure the screen inside the misting hose is clean as well.
11
Advertisement
