Advertisement
OPERATING INSTRUCTIONS
FAN-ONLY MODE
1.
Plug in the unit, press the reset button on the
GFCI, and select a fan speed on the control
panel. The fan will start running as soon as you
select a fan speed.
2. To start/stop fan oscillation, push down/pull up
the clutch knob (G).
3. To adjust the airflow upward or downward,
simply tilt the fan head by hand and move to the
desired angle.
4. The height of the fan can be adjusted by
loosening the height adjustment knob (O) and
carefully raising or lowering the fan and
retightening the knob.
MISTING MODE
Connect a standard ¾" garden hose to the misting hose
1.
valve (S). Water pressure should not exceed 550 kPa (5.6
kfg/cm2). Only use a hose in good condition.
2. With the garden hose turned on at the spigot, turn the lever
on the misting hose valve to the right to turn on water to the
fan.
3. Turn the lever back (to the left) to temporarily disable the
misting feature. To disable the misting feature for a longer
period of time, close the water valve lever and turn the
spigot off as well.
9
3
2
1
0
Advertisement
