Table of Contents
Advertisement
1. Important
This electronic user's guide is intended
for anyone who uses the Philips monitor�
Take time to read this user manual
before you use your monitor� It contains
important information and notes
regarding the operation of your monitor�
The Philips guarantee applies
provided that the product is handled
for its intended use, by its operating
instructions, and accompanied by the
presentation of the original invoice or
cash receipt that indicates the date of
purchase, dealer's name and model, and
production number of the product�
1.1 Safety precautions and
maintenance
Warnings
The use of controls, adjustments, or
procedures other than those specified
in this document may result in exposure
to shock, electrical hazards, and/or
mechanical hazards�
Read and follow these instructions when
connecting and using your monitor�
Excessive sound pressure from earphones
and headphones can cause hearing loss�
Adjustment of the equalizer to maximum
capacity increases the earphones and
headphones output voltage; thereby
increasing the sound pressure level�
Operation
•
Please keep the monitor out of direct
sunlight� Lengthy exposure to this
type of environment may result in
discoloration and damage to the
monitor�
•
Keep the display away from oil� Oil
may damage the plastic cover of the
display and void the warranty�
•
Remove any object that could fall
into ventilation holes or prevent
proper cooling of the monitor's
electronics�
•
Do not block the ventilation holes in
the cabinet�
•
When positioning the monitor, make
sure the power plug and outlet are
easily accessible�
•
If turning off the monitor by
detaching the power cable or DC
power cord, wait for 6 seconds
before attaching the power cable or
DC power cord before returning to
normal operation�
•
Please use the approved power cord
provided by Philips all the times� If
your power cord is missing, please
contact your local service center�
(Please refer to the Service contact
information located in the Important
information manual�)
•
Operate under the specified power
supply� Use of incorrect voltage will
cause malfunction and may cause fire
or electric shock�
•
Protect the cable� Do not pull or bend
the power cable and signal cable�
Do not place the monitor or any
other heavy objects on the cables� If
damaged, the cables may cause fire
or electric shock�
•
Do not subject the monitor to severe
vibration or high-impact conditions
during operation�
•
To avoid potential damage, like
the panel peeling from the bezel,
ensure that the monitor does not tilt
downward by more than -5 degrees�
If the -5 degree downward tilt angle
1
Advertisement
Table of Contents
