Philips DC612 Operating Instructions Manual page 13

INITIALISATION (to modify.the set's initial settings to your preferences
m Selecting personal settings
Press the BND key for at least 2 seconds (until you hear a beep) to enter the 'INIT' mode.
The display shows 'INIT' and then the setting to be changed.
[2] Press the SCAN key one or more times until the eption you want to modify is displayed (see
list of 'INIT' options).
[3] Briefly press the —« or B> key one or more times to adjust the choice.
— The choice shown on the display will be memorized by the set when you select another
option or leave the 'INIT' mode. :
Press the BND key for at least 2 seconds (until you hear a beep} to leave the 'INIT' mode.
Note: The set automatically leaves the 'INIT' mode (with a beep} about 1 minute after your last operation.
'INIT' options
initial settings (when set leaves factory} are shown in bold. if you are unsure of the best choice, choose
the factory setting.
option | choice | Usage
SRC* (CDC, AUX] Source connected to connector C of the car radio:
- Select 'CDC' if connecting a Philips CD* changer (D?B type}.
~ Select 'AUX' if connecting a portable audio player.
5...12... 23] Reference volume level of tuner
-2,-1, 0, +1, +2] Volume level of cassette relative to tuner.
(-2,-1, O, +1, +2] Volume level of CD* Changer relative to tuner.
(-2,-1,O, +1, +2] Volume level of AUX input relative to tuner.
(-2,-1, O, +1, +2] Volume level of Traffic Announcements and News bulletins relative to tuner
PHONE [NO, LO, Hi] Select 'LO' or 'HI' according to phone ('LO' in most cases}.
| Select 'NO' if no phone connected.
2,
BLEEP -2,-1,0, +1, +2] Select volume level of confirmation beeps (useful if external amplifier
is connected).
LW {OFF, ON] Select 'OFF' to suppress LW band if it is not used.
{OFF, ON] Select 'OFF' to suppress the SW band if it is not used.
LOGI [OFF, ON] Select 'ON' if you want to be able fo use the set even when the car ignition is
switched off. The 'On/off logic' feature enables use of the set (for one hour}
even when you have removed the car ignition key (See 'MOUNTING
INSTRUCTIONS'.}
*only for certain versions.