Advertisement
Function Setting
Loading or copying the current setting values
NOTE:
To make the following settings, connection between the remote
z
controller and the smartphone is required. (→P.34)
The setting contents in the Function setting may be reflected by turning
z
off the air conditioner. If loading results or response results do not
match, turn off the air conditioner and try again.
(a)
(d)
(b)
(c)
Loading the setting value
The Setting numbers for the Function
setting currently set can be confirmed.
Tap the entry field (a) for Func
No. and enter the Function
number to be loaded.
Tap [Load] (b) to display the current
Setting No. in the Response field.
Copying the setting value
The loaded Setting number can
be copied to the setting file.
After the setting value is loaded,
tap the copy button (c) to copy the
numerical value in the Response
field to the Setting No. field.
Sending the setting value
The Function setting allows the
setting to be sent during file creation.
Tap [Send] (d) during file creation
to send the entered Function
setting to the remote controller.
32
To CONTENTS
Advertisement
