Download Print this page

Sanyo SFX-11 Service Manual page 3

Facsimile transceiver
Hide thumbs Also See for SFX-11:

Advertisement

1. INSTALLATION
To unpack the SFX-11:
1. Open the carton.
2. Remove the accessories (handset, recording paper roll, etc.) from the carton.
3. Remove the fax machine along with the foam braces on both sides.
4, Remove the polyethylene wrapping 'around the fax machine.
5. Remove the transportation tapes.
6. Save the carton and the foam braces for later storage and/or shipping.
7. Place the machine where there is access to an AC outlet and a modular phone jack. (Be sure to observe the
precautions below.)
Placement precautions
@ Avoid placing the SFX-11
in humid or dusty places, or in places where it will be exposed to excessive heat
(direct sunlight, heaters, etc.).
@ Do not step on, or set anything on, the AC cord. DAMAGE TO THE AC CORD IS A SAFETY RISK AND CAN
CAUSE A FIRE.
@ install the unit only on a stable surface.
@ Do not connect the SFX-11
to the same AC outlet as appliances that generate large amounts of interference
(heaters with thermostats,
appliances
with motors,
etc.). It is best to use a completely
separate
electrical
outlet.
@ Keep the SFX-11 away from water. If water accidentally enters the unit, unplug the AC power cord immediately.
DO NOT SWITCH THE UNIT ON AGAIN. Contact an authorized Sanyo service center or dealer.
Handling precautions
e Do not remove any parts that are held in place with screws. (The SFX-11 does not contain any user-serviceable
items).
@ Maintain standard room temperature
5°C — 35°C(41°F —95°F) during use. Do not subject the unit to shock or
vibration. Do not move the unit while it is in use.
eA rapid increase in room temperature in cool weather can cause condensation to form inside the unit. If this
happens, wait at least 15 minutes after turning the unit on before attempting to operate it. Failure to do so may
result in paper jams and/or poor print quality.
® When cleaning the cover or operation panel of the unit, wipe gently using a damp cloth to which a small
amount of a neutral detergent has been added. NEVER USE SOLVENTS OR CHEMICALLY TREATED CLOTHS.
Telephone line and AC connections
Connecting telephone line
© The SFX-11 should be not share a telephone line cord with other communica-
tion equipment, except extension telephone and/or answering machine pre-
pared tor the connection, as this may obstruct the proper functioning or the
unit
Connecting handset
Handset
Coiled cord
To wall jack
Telephone line cord*
* The telephone line cord differ with each country.
Handset jack
® Another telephone and/or answering machine can be connected to the SFX-11
through the line cord supplied by SANYO dealer.
Power
supply
Connecting AC
AC outlet
|
Connect AC plug into AC outlet.

Advertisement

loading