Menu Features And Functions - Hitachi 32HXT16U Instruction Manual

Volume
Equalizer:
Balance
Headphone/Lineout
Sound Mode
AVL
Dynamic Bass
Surround Sound
Digital Out
Automatic Channel Scan
(Retune)
Manual Channel Scan
Network Channel Scan
Analogue Fine Tune
First Time Installation
Clear Service List
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Menu Features and Functions

Sound Menu Contents
Adjusts volume level.
In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic
and User. Press the MENU button to return to the previous menu. Equalizer menu
settings can be changed manually only when the Equalizer Mode is in User.
This setting is used for emphasizing left or right speaker balance.
When you connect an external amplifier to your TV using the headphone jack, you
can select this option as Lineout. If you have connected headphones to the TV, set
this option as Headphone.
Please ensure before using headphones that this menu item is set to Headphones. If
it is set to Line Output, The output from the headphone socket will be set to maximum
which could damage your hearing. Also please ensure before using headphones that
the headphone volume is set to a low level, to prevent damage to your hearing.
You can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel
supports that mode.
Automatic Volume Limiting (AVL) function sets the sound to obtain fixed output level
between programmes (For instance, volume level of advertisements tend to be louder
than programmes).
Enables or disables the Dynamic Bass.
Surround sound mode can be changed as On or Off.
Sets digital out audio type.
Install and Retune Menu Contents
Displays automatic tuning options.
Digital Aerial: Searches and stores aerial DVB stations.
Digital Cable: Searches and stores cable DVB stations.
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores aerial DVB and analogue stations.
Digital Cable & Analogue: Searches and stores cable DVB and analogue stations.
This feature can be used for direct broadcast entry.
Searches for the linked channels in the broadcast system.
You can use this setting for fine tuning analogue channels. This feature is not available
if no analogue channels are stored.
Deletes all stored channels and settings, resets TV to factory settings and starts first
time installation. You can follow the instructions in the Initial Installation section for
more information on this process.
Factory-default PIN number is 0000.
(*) This setting is visible only when the Country option is set to Denmark, Sweden,
Norway or Finland. Use this setting to clear channels stored.
English - 16 -