Advertisement
(09€0S°0N)
21
Front Panel
ve)
a
ne
Remote Control
PAGE-3
The "HOME SITTER" feature enables the TV to be turned on
and off automatically at preset times every day.
With "PAGE-3" (or "PAGE-1" or "PAGE-2") MENU displayed
on the screen, press "7" of 10-Digit Keypad @ . The display
will shaw:
YQ Pm.
CHANNEL
10 <NOD
© At this time, if the display of "POWER INTERRUPTED/
WOULD YOU SET CLOCK FIRST? appears, it shows that
the clock isnot operating, and the HOME SITTER will not
function,
<=
'
F
Prass 1" (YES) to set the clock. {If '2".(NO) is pressed, the
message "YOU CANNOT OPERATE HOME SITTER!" is
disptayed,) »
F
:
Set the clock. See "6,"SET CLOCK"
on the Previous page
for details regarding clock setting. After setting the clock,
the message
"THANK
YOU!!"
appears to show that the
clock has just been adjusted and the' HOME
SITTER
is
now ready to be set.
-~16—
1) SET
Press "1" to place the HOME SITTER in standby. The ON/OFI
time and channel number which have been previously set will bi
displayed. When POWER switch @ is pressed to turn the T\
off, POWER/ON
TIMER
indicator @
lights and "YES"
ar
pears On the screen to show that the HOME SITTER is in op
eration.
2) CANCEL
:
Press 2" to cancel the HOME SITTER. "NO" appears to shov
that the HOME SITTER has been cancelled.
3) CHANGE
Press ''3" to re-adjust the HOME SITTER setting. Follow th
on-screen
displays to set the switch-on time, switch-off tim:
and channel number, using the 10-Digit Keypad.
LHL
TR
@Set the switch-on time.
@ Select "AM" or "PM".
@ Select "AM" or "PM".
@® Set the channel number.
@Set the switch-off time.
When the channef number is set, the display will show:
© This display shows that the HOME
SITTER
is set to switch
the TV on at 6:30 PM, switch it off at 11:00 PM and the
channel to be received is "CABLE 13".
. CHANNEL GUARD
The "CHANNEL
GUARD"
feature allows you to assign an
"tD number' to specific channels of your choice, making them
"Guarded
Channels".
This
prevents
these specific channels
from being selected, unless the 'ID number" is keyed in.
First select a channel you wish to set as a Guarded Channel.
With "PAGE-3" (or "PAGE-1" or "PAGE-2") MENU displayed
on the screen, press "8" of 10-Digit keypad
@® . The display
will show:
Then, press 0". The display changes to:
@ Channel
numbers displayed are the Guarded
Channels, if
already previously set.
Notes:
®
Jf an invalid time or channel number is selected, it will be
rejected and it must be reset properly.
© First select the broadcast mode (CHANNEL or CABLE) of
the channel you wish to set for the HOME SITTER with
ANT/CABLE
button @® on the Remote Control before
entering the HOME SITTER
mode, since broadcast mode
switching while in the HOME SITTER will cancel the mode.
® lf you wish to reset the switch-on time only, stop keying in
data {waiting until the on-screen
display disappears) after
keying in the AM/PM setting, or press keys other than 10-
Digit Keypad. And, if you wish to reset the switch-on and
switch-off time only, the procedure is the same.
@ The function that automatically turns the TV off for the ON
TIMER, if no TV operation is performed after 2 hours, does
not operate for the HOME SITTER.
:
©
if the power
is disconnected (such as in a power failure,
etc.}, and reapplied later, the HOME SITTER will be cancel!-
ed. When disconnected only for a couple of minutes, the
HOME
SITTER
is reactivated; however, it turns the TV on
and off later than the set time by the amount of time of in-
terruption,
®@ If the channel which has already been set as a "Guarded
Channel"
is selected, that channel is rejected and cannot be
set for the HOME
SiTTER.
(For details of the Guarded
Channels, see below.)
1) SET
.
Press "1". The display changes to:
SELECT NO.
7 CHAN!
2 CABLE
12
3 CABLE 35
For example, if the current channel being received is "CHAN-
NEL 25", and you wish to store this channel as Guarded Chan-
nel 1, then press "1. The display changes to show that CHAN-
NEL 26 is now set as Guarded Channel 1.
Continued on next page »
~7-
Advertisement
