Advertisement
RX-305TN(LTN)/RX-304BK(LBK)
@ POWER
(ON/STANDBY)
Press this button to turn the power ON. Press again to turn the
power off and activate the STANDBY mode. The STANDBY in-
dicator will light.
A small amount of power (5 watts) is consumed in the STAND-
BY mode. To turn the power off completely, disconnect the power
cord from the wall outlet. Preset data is retained in memory while
the power cord is plugged into the wall outlet. If the power cord
is disconnected or a power failure occurs, data is retained for two
or three days.
© SPEAKERS
1, 2
Turns speakers 1 and 2 ON or OFF.
© PHONES
Plug headphones into this jack. If you want to hear from the head-
phones alone, turn OFF speakers 1 and 2.
© TREBLE
Ajusts treble sound. Slide the knob to the left to weaken the tre-
ble sound and to the right to strengthen it.
@ BASS
Adjusts bass sound. Slide the knob to the left to weaken the bass
sound and to the right to strengthen it.
@ SURROUND
Turns the surrund sound effect ON or OFF.
@ LOUDNESS
Turns LOUDNESS ON or OFF. The ON position makes up for loss
of the human auditory sensation when the sound volume is low.
© SOURCE
Use the following keys to select sources:
PHONO:
Press to listen to records.
CD:
Press to listen to CDs.
FM:
Press to listen to FM broadcasts.
Press to listen to AM (MW/LW) broadcasts.
Press to operate the tape deck connected
to the TAPE 1 terminals.
TAPE 2/VIDEO SOUND:
Press to operate the tape deck or video
equipment connected to the TAPE 2/VIDEO
SOUND terminalis.
(alternates between ON and OFF)
AM (MW/LW):
TAPE 1:
@ BALANCE L, R
Adjusts the volume balance between the left and right speakers.
@ TUNER
Use the following keys to listen to AM or FM broadcasts:
MEMORY:
Stores an AM or FM frequency (station) on
a preset channel.
Stores an AM or FM frequency on a preset
channel using the AUTO MEMORY feature.
FM MODE/MUTE:
Selects FM reception modes.
TUNING
<,>:
Tunes in an AM or FM frequency.
1-10,
+10 (Tuner numeric keys):
Press to select preset channels.
AUTO MEMORY:
@ MUTE
Turns sound ON or OFF temporarily.
@ VOLUME
<,>
Adjusts the volume of sound from the speakers or headphones.
@® REMOTE SENSOR
Receives signals from the remote control unit.
© RECEIVED and POWER STANDBY indicator
Lights when signals are received from the remote control unit or
when the machine is in the STANDBY mode.
© Display and indicator
Shows the operating status.
Advertisement
