Table of Contents
Advertisement
BASIC OPERATIONS
Beginning Record
Playback From Any
Point (Manual
Play)
4
Press the FUNCTION switch and set it to
PHONO.
Piace the record on the platter mat.
Remove the stylus cover and release
the tonearm
from the arm rest.
Set the SPEED switch.
Move the ARM-ELEVATION switch to the
UP position.
Move the tonearm
by hand to the de-
sired position over the record.
Move the ARM-ELEVATION switch to the
DOWN
position.
@
The tonearm will descend onto the record and playback
will start.
8 To stop the player while a record is
being played, press the START/STOP
switch.
TUNER
The illustration shows model TX-777ZL.
i OD Ob
wh
Band selector switches
= TUNING knob
FM AND AM
(MW/LW)
RECEPTION
1 Press the FUNCTION switch and set it
to TUNER.
2 Press the appropriate band selector
switches on the stereo tuner.
3 Rotate the TUNING knob and tune in
the desired station.
TX-888Z (L)
MEMORYswitch-
BAND
SELECTOR
switch
STATION CALL switches
Presetting
1
Begin receiving.
® To receive radio station, see "Manual Tunig".
When
memorizing
an FM station, either press the FM
MONO
switch to forcibly memorize the station in the
monaural
mode,
or memorize
the station
in the auto
stereo mode
(with FM
MONO
switch left in the OFF
position).
Press the select switch to select Mode
1 or Mode 2.
When presetting using Mode
1 When presetting using Mode 2
STATION CALL switches:
STATION CALL switches:
Not fit
pit
See os
Ses Ses
eae
eee
4
Press the MEMORY
switch.
During
the approximate ten seconds within
which the memory circuit functions,
push the desired STATION
CALL
switch to memorize the current fre-
quency in that switch.
e When the frequency indicator stops flashing, presetting is
no longer possible. Press the MEMORY switch again to per-
form presetting.
Repeat steps 1 to 3 to preset station
into buttons 1 through 24.
® Up to 24 AM (MW and LW) and FM stations may be
preset. !f you accidentally preset a station into a STA-
TION CALL switch which contains information, it will
be erased and the new station will be entered instead.
Reception using preset tuning
1
Press the STATION
CALL switch into
which the desired station has been
preset. (When necessary, do not ne-
glect to perform Station Mode selec-
tion as well.)
Tuning can
be performed
simply and accurately by
following the above procedure
NOTE.
® The contents of the STATION
CALL switch will be
preserved for several days, even if the deck amplifier's
power cord is unplugged.
® If a preset station has been erased, reset it.
M
1
2
3
a,
he
a
anual tuning (FM/AM
reception)
Press the FUNCTION
switch and set it
to TUNER.
Select your desired broadcasting band
using the BAND
SELECTOR
switch.
Use the TUNING switch to locate the
frequency of your desired station.
For step-by-step searching, press the TUNING
switch
once and release it immediately. For continuous rapid
scanning
keep
the
TUNING
switch
pressed.
The
TUNED
indicator will light up when the station is tu-
ned in best.
NOTE:
The TUNED indicator will not function for broadcasts received
over fong distances or when signals are weak.
15
<ARB1072>
Advertisement
Table of Contents
