Download Print this page

Sharp SM-207H Operation Manual page 15

Stereo amplifier /stereo cassette deck / both sides play stereo turntable
Hide thumbs Also See for SM-207H:

Advertisement

The unit may
not be operated when
the </# PLAY/CUT
button
is pressed
immediately
after the POWER
switch is
id
set to
the m ON
position.
Since
this is because
control
—+__——
a
microcomputer is not yet ready, press the «/s PLAY/CUT
tale
button again after about three seconds.
Do not push this part strongly or open this up by hand.
While the turntable compartment
is opening or closing, do
not open
or close it forcibly by hand.
If excessive force
is applied to the turntable compartment, it will be stopped on
the
way
and all the APMS
indicators
will flash.
In this
case, after setting the POWER
switch to the I OFF position,
set it again to the m= ON
position
and start the operation
- over again.
lf the
OPEN/CLOSE
button
is pressed while a record
is
playing, the record will stop rotating and the turntable com-
partment will be opened.
e@ The turntable compartment
will not be opened when the
POWER switch is at the
Jf OFF position.
SIDE A/SIDE B
oa
a
Press the SIDE A/SIDE B,
button
to select the side
you wish to play.
e When
playing both sides,
light the indicator to the
side
that. you
wish
to
play first.
PLAY/CUT
OFF
an ON
Press
the </m PLAY/CUT
button.
Load
the
record
on
the
turntable platter.
Switch on both the ampli-
fier and turntable.
Both Sides Play
BOTH SIDES PLAY/CUT
Press
the
~ ~_]
BOTH/
SIDES button.
Then press the </m PLAY/
CUT button,
e Both
sides can be played
when
the
J]
BOTH
SIDES
button
is pressed
while
the unit is on the
"on.
side''
play
mode.
E| 14

Advertisement

loading

This manual is also suitable for:

Rt-207hRp-207h