Configuration Transfers; Loading A Configuration From An Inverter - Toshiba PWU003Z Instruction Manual

5. Configuration transfers

5.1. Loading a configuration from an inverter

This procedure allows the user to retrieve a configuration file ("LOADFRMD00.CFG" to "LOADFRMD99.CFG") from
an inverter and load it onto the Parameter writer's SD card.
STEP
• Turn the parameter writer on pressing the Power ON/OFF button for 2 seconds (see section 3.2).
• Connect the Parameter writer to the inverter using the RJ45 cable (see section 4.2).
• Press "ENT" when the screen displays "Main menu / Action".
1
• Select the "Action Config / Device -> MLD" menu using the arrow keys and press "ENT".
• The connection destination is searched. It may take one minute or more. If no inverter is
connected, a message "No device / connected" appears on the screen.
• "Device -> MLD / LoadFromDevicexx" appears on the screen. Press ENT until the transfer starts.
• "Load Config / Successful" : The configuration has been loaded successfully onto the
Parameter writer; disconnect the RJ45 cable from the inverter. The inverter configuration
file ("LoadFrmDxx.CFG") is now loaded onto the Parameter writer's SD card.
2
(The folder ("LoadFrmDev" / "model name") is automatically created in the SD card, and
the configuration file is allocated and saved for each model.)
• Pressing "ENT" returns the user to the "Action Config" menu.
Note :
• If a configuration file has already been loaded 100 files onto the Parameter writer's SD card, it will be overwritten by
the new configuration file from 101st file. Renaming the file on the SD card (via a PC connection) means that the
user can store more than one file on the SD card. ( "file.CFG" can be renamed as "file1.CFG" )
• Keep on pushing ESC key if you want to cancel the process of searching communication mode.
Main menu
Action
ENT
Action Config
MLD -> Device
Action Config
Device -> MLD
ENT
Action Config
XXXXXXXX
Device -> MLD
LoadFrmDxx.cfg
ENT
LoadFrmDxx.cfg
ENT <<<<
LoadFrmDxx.cfg
<<<<<<<<
LoadFrmDxx.cfg
<<<<<<<<<<<<
Load config
Successful
Actions
-13-
1
2
E6581680