Related Manuals for Fujitsu P2711 TE QHD
Summary of Contents for Fujitsu P2711 TE QHD
-
Page 1: Table Of Contents
Disassembly and repairs Display P2711 TE QHD Display P2711 TS QHD Display P2711 TS CAM Version date 12.01.2023 Disassembly and repairs Category Contents Disassembly and Repair Information on the installation and removal of components Tools Disassembly P2711 TE/TS QHD Monitor Exploded Drawing... -
Page 2: Disassembly And Repair
Disassembly and Repair We recommend printing out the relevant sections of this chapter prior to installation as the device for installing/removing hardware components needs to be switched off. In order to repair the display, please follow the disassembly instructions to remove the defect part, replace it with spare part, then follow the instructions in reverse order. -
Page 3: Information On The Installation And Removal Of Components
Information on the installation and removal of components Please pay attention to the locking mechanism (indentations and centring flex foil cables) when installing hardware components. Note that some components on the mainboard may be very hot if the device was in use shortly before the case was removed. Utmost care is required during installation and removal to avoid damaging components. -
Page 4: Tools
Tools Screwdriver: Pozidriv PZ 2 Screwdriver: Phillips PH 1 Hexagon Screwdriver size 5 Flat Head Screwdriver Page 4 of 14... -
Page 5: Disassembly
Disassembly Step Figure Description Remove the screws to Remove the Stand Base remove the Ass'y. stand base assy. Remove the Remove the rear cover rear cover Disconnect the Disconnect flex foil cable the flex foil to remove the cable. rear cover. Page 5 of 14... - Page 6 Remove the Remove the tapes and the tapes and the flex foil cable flex foil cable Remove the Remove the screws to screws to remove the remove the middle frame middle frame and the panel and the panel Take off the Take off the tape and tape and...
- Page 7 Remove the Remove the screws to main board remove the and power main board and board power board Remove the Remove the connectors connect flex foil cables Remove the Remove the speakers speakers Page 7 of 14...
- Page 8 The panel The panel Remove the screws to The WEBCAM remove the WEBCAM Remove the screws to The key board remove the key board Page 8 of 14...
- Page 9 The middle The middle frame frame Remove the The USB screw to board remove the USB board. The Rear The Rear Cover Cover Page 9 of 14...
-
Page 10: P2711 Te/Ts Qhd Monitor Exploded Drawing
P2711 TE/TS QHD/CAM Monitor Exploded Drawing Page 10 of 14... -
Page 11: P2711 Ts Cam Monitor Exploded Drawing
P2711 TS CAM Monitor Exploded Drawing Page 11 of 14... -
Page 12: Replaceable Components And Services
Spare parts availability 7 years after end of product life How to obtain spare parts https://docs.ts.fujitsu.com/dl.aspx?id=3e31d2de-d35f-4163-80ee-329dae20b6b7 Product related services – https://docs.ts.fujitsu.com/dl.aspx?id=aae0a6a3-5b6e-4f82-99d7-6956055e4312 Comprehensive offerings at a glance Fujitsu product support hardware https://www.fujitsu.com/emeia/products/product-support-services/hardware-maintenance Fujitsu Troubleshooting and Support https://support.ts.fujitsu.com/Index.asp?lng=COM Page 12 of 14... -
Page 13: Disposal Information For Recycling Companies
Disposal information for recycling companies These instructions are for the complete dismantling of a Fujitsu product. All materials can thereby be disposed of according to their provision in the EC directive 2012/19/EC (Waste Electrical and Electronic Equipment (WEEE)). Display Product group:... - Page 14 Materials which must be disposed of in a special manner Designation Remarks Quantity Plastics which contain brominated flame This product may contain plastic components containing brominated flame retardant retardants. To the best of our knowledge, we provide this information for sorting them out.