Fujitsu P2711 Series Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Monitor
  5. P2711 Series
  6. Manual
Fujitsu P2711 Series Manual

Fujitsu P2711 Series Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Display
Operating Manual
FUJITSU Display
Serie P2711 / B2711

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu P2711 Series

Summary of Contents for Fujitsu P2711 Series

  • Page 1 Display Operating Manual FUJITSU Display Serie P2711 / B2711...
  • Page 2 Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 80807 Munich, Germany Name and address of the importer in the UK Fujitsu Services Limited 22 Baker Street, London, W1U 3BW, United Kingdom "http://www.fujitsu.com/fts/" Copyright © Fujitsu Client Computing Limited 2022. All rights reserved. Publication Date 12/2022 Order No.: A26361-K1701-Z320-1-19, edition 1...

  • Page 5: Table Of Contents

    FUJITSU Display Serie P2711 / B2711 Operating Manual Your LCD screen... Important notes Getting started Operation Additional information Troubleshooting Technical specification Appendices...
  • Page 6 Remarks Notes on the product description meet the design requirements of Fujitsu and are provided for the purposes of comparison. The actual results may differ due to several factors. Subject to technical changes without prior notification. Fujitsu accepts no responsibility for technical or editorial mistakes or omissions.
  • Page 7 Adjusting the volume ..............44 Fujitsu...
  • Page 8 Appendices ................83 Fujitsu...

  • Page 9: Your Lcd Screen

    Validity of the Reference Manual This reference manual applies to the following monitors: • FUJITSU Display P2711 TE QHD / P2711 TS QHD / P2711 TS CAM • FUJITSU Display B2711 TE QHD / B2711 TS QHD FUJITSU Display B2711 TE FHD / B2711 TS FHD •...

  • Page 10: Target Group

    For ergonomic reasons, we recommend a screen resolution of 2560 x 1440 dots (QHD models) or 1920 x 1080 dots (FHD models). Because of the technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a refresh rate of 60 Hz. Fujitsu...

  • Page 11: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" Manual indicates a button on the monitor, e.g:...

  • Page 12: Important Notes

    Use a screen saver with moving images and activate the power management for • your monitor to prevent still images from "burning in". • If you operate the device with the swivel arm or a similar accessory, it must not be turned by 180°. Fujitsu...

  • Page 13: Power Cable

    For devices which sit on the floor, only SJT type cable sets may be used. • The cable set must be selected according to the rated current for your device. • If necessary, replace the original power cable with a regular grounded 3-core mains lead. Fujitsu...

  • Page 14: Transporting The Device

    CE marking The shipped version of this device complies with the requirements of EU directives 2014/30/EU "Electromagnetic Compatibility", 2014/35/EU "Low voltage directive", 2009/125/EU "Ecodesign directive" and 2011/65/EU "RoHS directive". Fujitsu...

  • Page 15: Certification Marking

    Important notes Certification marking The certification mark is affixed near the VESA mounting surface. It becomes visible once the stand is removed. 1 = Certification marking Fujitsu...

  • Page 16: Disposal And Recycling

    "http://www.recupel.be" can be found at: environment-care/recycling/" "http://www.swico.ch" Asia Taiwan: Fujitsu America, Inc. Environmental Protection 1250E. Arques Avenue Administration Sunnyvale, CA 94085 U.S.A. Executive Yuan R.O.C. Phone No.: (408) 746-6000 "http://recycle.epa.gov.tw" You can also find information about this on the Internet at "https://www.fujitsu.com/emeia/about/local/csr/recycling/".

  • Page 17: Getting Started

    ► Should you discover that the delivery does not correspond to the delivery note, notify your local sales outlet immediately. Do not discard the original packing material of the devices. You may need the packaging in the future if you need to transport your device. Fujitsu...

  • Page 18: Setting Up The Device

    To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear. Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ► Position the monitor outside the reach of a light source (1). Fujitsu...
  • Page 19 Depending on the situation, it may be advisable to use a swivel arm or similar accessory (VESA FPMPMI), which are available from specialist dealers. For this purpose the monitor base must be removed beforehand as described in Chapter "Removing monitor base", Page Fujitsu...

  • Page 20: Mounting The Monitor Base

    ► Insert the base plate on the foot (1). ► Secure the base plate with the screw (2). ► Lay the monitor on its front on a soft surface. ► Insert the monitor stand into the bracket in the direction of the arrow (3). Fujitsu...

  • Page 21: Adjusting Height

    (see "Adjusting height", Page 17). Adjusting the rotation The monitor can be rotated by ±172°. ► Grasp the monitor with both hands on the right and left edge of the casing and turn it to the desired position. Fujitsu...

  • Page 22: Removing Monitor Base

    For instructions on how to mount the swivel arm or a similar accessory, please see the documentation for the swivel arm or similar accessory. The assured ergonomics and safety of the monitor may be limited if the foot provided for the monitor is not used. Fujitsu...

  • Page 23: Connecting The Device

    4 = HDMI-IN port 10 = Security slot for Security Lock 5 = Display port IN socket 11 = USB-C port (USB 3.2 Gen1, Downstream) 6 = USB-C port (USB 3.2 Gen1, Upstream, 12 = USB-A port (USB 3.2 Gen1, Downstream) screw-mounted) Fujitsu...

  • Page 24: B Series (Qhd)

    3 = DVI-D port (DVI) 9 = Security slot for Security Lock 4 = HDMI port 10 = USB-C port (USB 3.2 Gen1, Downstream) 5 = DisplayPort port 11 = USB-A port (USB 3.2 Gen1, Downstream) 6 = Audio IN socket Fujitsu...

  • Page 25: B Series (Fhd)

    9 = Power connection 4 = DVI-D port (DVI) 10 = Security slot for Security Lock 5 = HDMI port 11 = USB-C port (USB 3.2 Gen1, Downstream) 6 = D-SUB port (VGA) 12 = USB-A port (USB 3.2 Gen1, Downstream) Fujitsu...

  • Page 26: Connecting Cables To The Monitor

    ► Plug the network cable supplied into the socket on the monitor. A lock (Security Lock) can be mounted in the security slot to protect the monitor against theft. A Security Lock is not included with the monitor at delivery. Fujitsu...

  • Page 27: Attaching The Cables To The Monitoring

    "Upstream" is connected to a computer. As soon as a computer gets connected via the USB-C monitor port, the active input signal is switched automatically to USB-C. When the USB-C connection is interrupted, the system automatically switches back to the last active input signal. Fujitsu...

  • Page 28: Driver Installation

    "Switching the device on and off", Page 27). ► For manual installation, download the monitor and network drivers from "http://www.fujitsu.com/fts/download". Select the relevant model of monitor and operating system for this on the website. ► Unpack the zip file. Fujitsu...

  • Page 29: Monitor Drivers

    ► Click on Update Driver in tab Driver. ► Click on Browse my computer for driver software. ► Click on Browse, navigate to the unpacked zip file and confirm with OK. ► Click on Next and wait until the driver is installed. Fujitsu...

  • Page 30: Network Drivers

    ► Open the directory with the unpacked contents of the network driver. ► Run the file setup.exe or the corresponding installation program and follow the instructions. ► After successful installation, the device is displayed in the Device Manager under the Network Adapters header as a Realtek USB GbE Family Controller. Fujitsu...

  • Page 31: Operation

    The monitor is in All-In-One mode and the computer is in power-saving mode. does not light up Monitor is switched off. The monitor is in All-In-One mode and the computer is powered down. ► Switch the device on again with the ON/OFF switch (1). Fujitsu...

  • Page 32: Notes On The Ambient Light Sensor And Presence Sensor

    If the Presence Sensor function is activated, the presence sensor is used to gradually reduce the background lighting to a minimum if no object is detected within the specified distance. The time until the background lighting turns completely off can be set under Delay in the OSD submenu. Fujitsu...
  • Page 33 find more information on this in chapter "Advanced setting functions", Page • Depending on the colour and nature of your clothes, the distance detected may deviate from the setting. • When the presence sensor is activated, the power consumption during operation is increased minimally. Fujitsu...

  • Page 34: Changing The Monitor Settings

    Opening the selected sub-menu Going to the next setting Running a function Going to the previous setting Decreasing the set value Increasing the set value Accepting the applied settings and closing the OSD menu Return to the parent menu Exiting OSD menu Fujitsu...

  • Page 35: Functions Of The Control Panel And The Osd Menu

    You will be asked to select a language when you first switch on the device: ► Press the button or the button to choose the desired language. ► Press the button to confirm. After selecting the OSD language for the first time, you can change it at any time in the OSD. Fujitsu...

  • Page 36: Setting Screen Display

    Values below 50 produce a softer picture. • Values above 50 produce a sharper picture. Saturation Setting colour saturation You can use this function to reduce or increase the intensity of the colours. This setting only applies for devices with YUV output (e.g. BluRay players). Fujitsu...

  • Page 37: Configuring The Osd Menu

    OSD submenu. ► Press the button to mark a function in the submenu. ► Press the button to make the desired setting. ► Press the button to save the settings and return to the main menu. Fujitsu...
  • Page 38 Setting the OSD menu display Use this setting to set the OSD menu to Bright or Dark mode. The standard settings depend on the model’s case colour. Dark is set as standard for the black TS and WS models. Fujitsu...

  • Page 39: Configuring The Presence Sensor

    This setting can be used to set the distance within which you want the sensor to react. If the vertical line is outside the setting bar, this will be judged as "absent" by the presence sensor. This setting can only be applied if the Presence Sensor function is active. Fujitsu...

  • Page 40: Advanced Setting Functions

    Advanced submenu. ► Press the button to mark a function in the submenu. ► Press the button to make the desired setting. ► Press the button to save the settings and return to the main menu. Fujitsu...
  • Page 41 With this function all settings are reset to the factory settings. ► Press the button to run the function. ► Press the button to confirm or the button to cancel. The language selection menu appears. With a VGA data cable, the message Auto Processing is displayed. Fujitsu...

  • Page 42: Displaying Information

    The message ECO Mode on or ECO Mode off is displayed. If ECO mode is activated, a brightness is used that is the optimum from both the ergonomic and ecological aspects. If ECO mode is deactivated, the monitor’s highest brightness setting can be used. This will increase power consumption. Fujitsu...

  • Page 43: Selecting The Input Signal

    ► Press the button to open the INPUT setting window. ► Press the button to select the desired monitor port. button to confirm the selected monitor port or to close ► Press the the window without making any changes. Fujitsu...
  • Page 44 USB upstream to the relevant video signal. The built-in KVM will be switched based on the assignments set. For further information on the KVM function, please refer to chapter "KVM feature", Page Fujitsu...

  • Page 45: Selecting The Application Mode

    Mode for the display of photos Increased picture definition and colour saturation. Video Mode for the display of videos Enhanced reaction time (overdrive), dynamic contrast (ACR). Custom Mode for special application purposes Free choice of colour temperature, advanced configuration capabilities. Fujitsu...
  • Page 46 Operation The brightness set in Mode is stored under Office, Photo, Video and Custom. Fujitsu...

  • Page 47: Setting Colour Temperature And Colours

    ► Press the button to select the desired colour channel. ► Press the button to make the desired setting. ► Press the button to save the settings and return to the previous menu. Fujitsu...

  • Page 48: Adjusting The Volume

    Set the volume for playback with the integrated loudspeakers Mute Switch the loudspeakers off or on Input Change the audio input signal to another source The setting only appears when more than one audio input signal is possible (e.g. display port and AUDIO-IN socket). Fujitsu...
  • Page 49 Operation Press on the button to easily switch the speakers on and off. Fujitsu...

  • Page 50: Adjusting The Brightness And Contrast

    Black level Setting the black level of the display With this function you modify the contrast of dark colour tones. Please note that, if you change this setting, correct colour representation can then no longer be assured. Fujitsu...

  • Page 51: Locking The Osd Menu

    ► Press the button and the ON/OFF button at the same time and keep them pressed for several seconds. The message OSD locked / unlocked is displayed. Please proceed in the same manner to release the locked OSD menu again. Fujitsu...

  • Page 52: Disabling Audio Settings

    ► Press the buttons at the same time and keep them pressed for a few seconds. The message Power button locked / unlocked is displayed. To remove the locking of the ON/OFF button again, proceed in the same way. Fujitsu...

  • Page 53: Using The Daisy Chain Function

    (e.g. display refresh rate, colour depth). DP1.2 ► Remove the orange cover "DP OUT" -connection. ► Connect the graphics card to the "DP IN" port or to the USB-C port (underside) on the first monitor. Fujitsu...
  • Page 54 As soon as the daisy-chain function is active, automatic detection of other signal sources (e.g. HDMI) is disabled. ► Press the button to change the input signal manually. If switched to an input signal that does not support a daisy chain, the daisy chain function is disabled automatically. Fujitsu...

  • Page 55: Additional Information

    Auto brightness Contrast Black level Sharpness Apply settings to all connected monitors Undo DisplayView can be downloaded here: "www.fujitsu.com/emeia/displayview" Function overview: • OSD management for screens equipped with DDC/CI • OSD direct access for quick changes • Settings for power saving mode and security settings for the presence sensor (only for models with presence sensor) •...

  • Page 56: Presence Sensor

    The desktop area of the Microsoft Windows operating system can be divided into several areas into which program windows can be fitted automatically by adjusting their size. Brightness/Contrast Connected displays Mode Rotation Desktop Partitioning Desktop Partitioning Display1 Display2 Presence Sensor Desktop Partitioning Profiles Information Press left Ctrl key for Desktop Partitioning Fujitsu...

  • Page 57: Power Management

    Factory settings, 17 W Power On – Energy Star without USB and audio – Without USB and 23 W audio Readiness Without USB devices 0.28 W < 0.5 W (standby) connected Without USB devices 0.26 W < 0.3 W connected Fujitsu...
  • Page 58 Factory settings, 15 W Power On – Energy Star without USB and audio – Without USB and 21 W audio Readiness Without USB devices 0.28 W < 0.5 W (standby) connected Without USB devices 0.26 W < 0.3 W connected Fujitsu...
  • Page 59 For detailed information on how energy-saving mode operates, please refer to the operating manual or technical manual of the computer. For maximum energy efficiency, the ACR (Advanced Contrast Ratio) OSD setting is activated by default. Deactivate the ACR function to achieve an optimised screen appearance. Fujitsu...

  • Page 60: Usb Power Delivery (Usb-Pd)

    USB-PD again. This monitor was tested using systems developed by FUJITSU, requiring power delivery of max. 95 W via USB-PD. For other systems that only accept their own brand of USB-PD charging device due to specific power delivery directives, the...

  • Page 61: Kvm Feature

    If data carriers are connected to the monitor, it is advisable before changing the input signal to disable the Remove hardware safely function to prevent the loss of data. The Swap Inputs function is only enabled if a computer is connected to both of the USB ports designated as "Upstream". Fujitsu...

  • Page 62: Bios Settings For All-In-One Operation

    BIOS settings for All-in-One operation The functions described here can only be assured in combination with selected FUJITSU Notebooks, Tablets and PCs that have a native USB-C connection with integrated display port support (e.g. ESPRIMO G, LIFEBOOK, STYLISTIC). The following three functions govern All-in-One operation.

  • Page 63: Esprimo G

    USB power to Always On and USB Keyboard to Enabled. Info System Advanced Security Power Boot Exit Miscellaneous Configurations MAC Address Pass Through [Enabled] Modern Standby Support [Disabled] ► Open the section in the BIOS settings of your system Advanced and there put Modern Standby Support on Disabled. Fujitsu...

  • Page 64: Lifebook / Stylistic

    Charge on running: [Fast charge] USB Type-C Power Delivery Power Delivery on System-Off: [Enabled] [...] ► In the BIOS settings of your system, open the Advanced - Miscellaneous Configurations header and set Power Delivery on System-Off there to Enabled. Fujitsu...

  • Page 65: Monitor

    Additional information Monitor ► In the OSD settings of your monitor, open the Advanced header and set the Power Button to Computer. By activating All-In-One mode, power consumption of the monitor increases in power-saving (‘Sleep’) mode. Fujitsu...

  • Page 66: Operating System

    On/Off switch on the monitor. Flashing at Your system is only compatible with the All-In-One mode to a limited extent. 3-second intervals It is not possible from every status to switch on the computer using the On/Off switch. Fujitsu...

  • Page 67: Network Port

    It is now possible to wake the system from a shutdown state (S5). MAC Address Pass Through (MAPT) With selected Fujitsu LIFEBOOK (9th generation onwards), it is possible to transfer the MAC address from the LIFEBOOK to the monitor’s network controller. To do this, activate the corresponding function in the BIOS and in the advanced driver settings of your system.

  • Page 68: Preboot Execution Environment (Pxe)

    When working continuously at a display screen, it is recommended that you take a five minute break every hour. During these breaks, do eye exercises to relax your eyes. To prevent eye strain and dryness, focus regularly on objects in the distance. Fujitsu...

  • Page 69: Display Firmware Update

    Additional information Display Firmware Update If a new firmware version is available for your model, you can download and install it via the following link: "www.fujitsu.com/emeia/displayupdate" Fujitsu...

  • Page 70: Ergonomic Colour Adjustment

    + Colour combination very suitable - Colour combination not suitable because colour hues are too close together, thin characters are not identifiable or rigorous focusing is demanded of the human eye. Fujitsu...

  • Page 71: Explanatory Information About Standard Iso 9241-307

    According to ISO 9241-3 (Class I), a maximum of 2 lit and 2 unlit pixels plus 5 lit or 11 unlit subpixels, or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels). Because Fujitsu supplies displays that are free of pixel faults, only subpixel faults enter into the evaluation. Fujitsu...

  • Page 72: Troubleshooting

    (see documentation for the computer or display adapter). Daisy Chain does not work There may not be enough bandwidth to feed the second monitor. ► Reduce the display refresh rate and/or the colour depth in the graphics settings of the system. Fujitsu...
  • Page 73 ► Ensure that the input signal does not get changed while the computer is in power-saving mode. ► Only connect one computer to the USB port designated as "Upstream". Further information can be found in the chapter "KVM feature", Page 57 Fujitsu...
  • Page 74 Network connection keeps being disrupted ► Download and install the latest "Realtek USB Ethernet Controller Driver" from www.fujitsu.com/fts/download. Issues are known to arise in relation to PCIe Active State Power Management (ASPM). Deactivating this feature can remedy the problem, which may increase the system’s power consumption.

  • Page 75: Technical Specification

    HDMI: 300 MHz USB-C: 300 MHz Power supply switches automatically 100 V – 240 V, 50/60 Hz Sound output 2 W left; 2 W right USB power output USB-C UFP: 95 W USB-C DFP: 15 W USB-A: 4.5 W Fujitsu...
  • Page 76 480p (31,469 kHz, 59.94Hz) 480p (31.50kHz, 60 Hz) 576p (31.25kHz, 50 Hz) 720p (37.5kHz, 50 Hz) Supported Video modes resolution (H*V / 720p (44.95kHz, 59.94Hz) 720p (45.0kHz, 60 Hz) 1080p (56.250kHz, 50Hz) 1080p (67,433 kHz, 59.94Hz) 1080p (67.5kHz, 60Hz) Fujitsu...

  • Page 77: B2711 Te Qhd / Ts Qhd

    DVI-D: 300 MHz Power supply switches automatically 100 V – 240 V, 50/60 Hz Sound output 2 W left; 2 W right USB power output USB-C DFP: 15 W USB-A: 4.5 W Total power consumption see Chapter "Power Management", Page 53 Fujitsu...
  • Page 78 480p (31,469 kHz, 59.94Hz) 480p (31.50kHz, 60 Hz) 576p (31.25kHz, 50 Hz) 720p (37.5kHz, 50 Hz) Supported Video modes resolution (H*V / 720p (44.95kHz, 59.94Hz) 720p (45.0kHz, 60 Hz) 1080p (56,250 kHz, 50 Hz) 1080p (67,433 kHz, 59.94Hz) 1080p (67.5kHz, 60 Hz) Fujitsu...

  • Page 79: B2711 Te Fhd / Ts Fhd

    VGA: 170 MHz Power supply switches automatically 100 V – 240 V, 50/60 Hz Sound output 2 W left; 2 W right USB power output USB-C DFP: 15 W USB-A: 4.5 W Total power consumption see Chapter "Power Management", Page 53 Fujitsu...
  • Page 80 1280×720 @60Hz 480p (31.469kHz, 59.94Hz) 480p (31.50kHz, 60 Hz) 576p (31.25kHz, 50Hz) 720p (37.5kHz, 50Hz) Supported Video modes resolution (H*V / 720p (44.95kHz, 59.94Hz) 720p (45.0kHz, 60Hz) 1080p (56,250 kHz, 50 Hz) 1080p (67,433 kHz, 59.94Hz) 1080p (67.5kHz, 60 Hz) Fujitsu...

  • Page 81: Sub D Port

    Technical specification SUB D port Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock Fujitsu...

  • Page 82: Dvi-D Port

    Analog Vertical Sync TMDS Data1– TMDS Data1+ TMDS Data 1/3 Shield not connected not connected +5V Power Earth Hot Plug Detect TMDS Data0– TMDS Data0+ TMDS Data 0/5 Shield not connected not connected TMDS Clock Shield TMDS Clock+ TMDS Clock– Fujitsu...

  • Page 83: Displayport Socket

    Lane 1 (negative) Earth Lane 1 (positive) Lane 0 (negative) Earth Lane 0 (positive) Connected to earth Connected to earth Auxiliary channel (positive) Earth Auxiliary channel (negative) Hot Plug Detect Return for Power Power for connector (3.3 V 500 mA) Fujitsu...

  • Page 84: Hdmi Port

    HDMI port Meaning TMDS Data2+ TMDS Data2 Shield TMDS Data2– TMDS Data1+ TMDS Data1 Shield TMDS Data1– TMDS Data0+ TMDS Data0 Shield TMDS Data0– TMDS Clock+ TMDS Clock Shield TMDS Clock– N.C. DDC/CEC Ground +5 V Power Hot plug detect Fujitsu...

  • Page 85: Usb-C Port

    SuperSpeed differential pair #2, RX, negative Bus power Sideband use (SBU) Non-SuperSpeed differential pair, position 2, negative Non-SuperSpeed differential pair, position 2, positive Configuration channel Bus power SuperSpeed differential pair #3, TX, negative SuperSpeed differential pair #3, TX, positive Ground return Fujitsu...

  • Page 86: Usb-C Upstream Port

    Technical specification USB-C Upstream port 6.8 mm 15 mm Fujitsu...

  • Page 87: Appendices

    Appendices Appendices TCO: "https://support.ts.fujitsu.com/IndexDownload.asp?SoftwareGuid=0b1846d6-c0bc-4535-8ad5- 1adb49610945" ENERGY STAR®: "https://support.ts.fujitsu.com/IndexDownload.asp?SoftwareGuid=d64ffa5e-9f01-475a-9269- 975391774341" BSMI RoHS: "https://support.ts.fujitsu.com/IndexDownload.asp?SoftwareGuid=2318189a-c6bc-4691-a45d- 2c37884197b6" China RoHS: "https://support.ts.fujitsu.com/IndexDownload.asp?SoftwareGuid=e8358fb7-83a3-45ca-b707- c36a868bf0ca" Fujitsu...

This manual is also suitable for:

B2711 series

Table of Contents