Hitachi ST-350 Service Manual page 147

NO. ERROR MESSAGE
29
Main Kicker Motor
30
Main Module Motor
31
Main Transfer Motor
32
Main Stacker1 Motor
33
Main Stacker2 Motor
34
Main Stacker3 Motor
35
Main Open 1
36
Main Open 2
37
Main Open 3
38
Main Internal Counter Sensor Setting
39
Main UV Setting
40
Main TDS Setting
41
Main Kicker Motor Setting
42
Main Stacker Motor Setting
43
DM Board Fram Memory
44
DM DDR Memory
45
DM ADC
46
DM SystemFlag
47
DM CIS Top Dirt
48
DM CIS Bottom Dirt
49
DM CIS IR Setting
50
DM CIS Top Setting
51
DM CIS Bottom Setting
Hitachi Terminal Solutions Korea Co., Ltd.
ST-350 Service Manual
1. Calibrate Motor again.
2. Check harnesses.
3. Replace the related board.
1. Check all covers are closed correctly.
2. Check the harnesses which are related cover
status.
1. Calibrate the related Sensor again.
2. Check harnesses.
3. Replace the related board.
1. Upgrade Main part again.
2. Replace DM B/D
1. After cleaning, calibrate CIS.
2. Check harnesses.
3. Replace the related board.
INSTUCTIONS
147