Hitachi ST-350 Service Manual page 38

STEP 3. Disassemble GUIDE UPPER and LOWER BODY
1. Remove the cover from Machine.
Area B
Area A
3. To separate the part, you have to remove 4
screws from Area A and Area B..
Screw B
5. Go to Area B and remove Screw B.
Hitachi Terminal Solutions Korea Co., Ltd.
ST-350 Service Manual
Harness A
Board A
Harness B
Harness C
2. Go to Rear Side of Machine and separate
Harness A, B and C from Board A
Screw A
4. Go to Area A and remove Screw A.
6. Put Guide upper and lower Body and
remove it from Machine.
38