Philips 5000 Series User Manual page 12

12
Secure the Mounting Plate with the
Mounting Plate Screws. Do not
overtighten screws.
Attention
Route the cable through the hole in the Mounting
Plate.
The Upper Screw on the top is OPTIONAL.
Before installing the Upper Screw, fasten the Screw
Post into the hole of the Exterior Assembly.
Install the Interior Assembly
13
Push the Battery Cover up in the direction
as illustrated.
Attention
Do not load batteries before �nishing the lock installation.
10
14
Insert the cable connector of the Exterior
Assembly to the socket on the Interior
Assembly. Push the connector in �rmly
until it is completely attached.