Table of Contents
Advertisement
2.5
Hardware Installation
2.5.1
Expansion Module Installation
Before installing your expansion module, ensure the system is
powered down and disconnect the power cord from the system. Make sure you have
the expansion module(s) ready to install. See Chapter 1 for expansion module
specifications for compatibility.
Turn the BOXER-8651AI system over so the bottom is facing up. Install each module by
first inserting at an angle (approx. 30°), then gently pressing down and securing. Refer
to the images below for guidance on removing the bottom panel, and overleaf for
which slot corresponds with each module.
Chapter 2 – Hardware Information
25
Advertisement
Table of Contents
