Connect The Battery Backup Unit - NEC N8103-126 User Manual

35

1-2. Connect the Battery Backup Unit

Each Server has different procedure to install the BBU. Refer to the server's manual to
check the steps.
Do not hold the part shown in figure with too much power. Parts might be
damaged.
Notice
Select the screws carefully to install to the server. Using wrong screw might be
causes the following problem.
1.
2.
Notice
Refer to "4. Checking Contents in Package" in Chapter 1.If there is no
information about the server, refer to the server's manual.
Cannot install the BBU.
Parts are damaged